Wulbur2000 Posted August 22, 2016 Share Posted August 22, 2016 Hi people not long bought my first impreza turbo 2000 very nice car looking to pick ur brains im after front shocks and springs and a starter motor someones done a diy job and took top level off spring in the hope of lowering it the rides shocking and very poor handling apart from that what a machine very happy thanks all 😉 Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted August 22, 2016 Share Posted August 22, 2016 New shocks and springs don't necessarily break the bank but you could look for a local Subaru specialist breaker or check eBay for breaker cars. 1 Quote Link to comment Share on other sites More sharing options...
quit Posted August 22, 2016 Share Posted August 22, 2016 Very poor handling ? Somethings knackered then lol try icp 1 Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted August 22, 2016 Share Posted August 22, 2016 The top of the spring by the sound of it 😂 Quote Link to comment Share on other sites More sharing options...
Wulbur2000 Posted August 22, 2016 Author Share Posted August 22, 2016 thanks Quote Link to comment Share on other sites More sharing options...
Wulbur2000 Posted August 22, 2016 Author Share Posted August 22, 2016 Bushes probs droplinks n tracking pmsl Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted August 22, 2016 Share Posted August 22, 2016 Nice to have a bit of work to do on them though. 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted August 22, 2016 Share Posted August 22, 2016 Hi n welcome. I haven't got any front shocks but I've got 4 elbaich springs and rear shocks with group n top mounts in the for sale section [emoji6] If it's not broke .....upgrade it 😊 1 Quote Link to comment Share on other sites More sharing options...
Wulbur2000 Posted August 22, 2016 Author Share Posted August 22, 2016 Defos be nice to get it all working properly thanks sb before starter motor startered playing up was having problems starting it up was taking two three plus times to fire up took off all earth points and sanded them for good ground and took Battery off for a bit seemed to work well a bit better then i checked my Battery and alternator voltage they were fine cleand coil pack connections to ht leads to then checked power to the crank sensor read 0.00 so found one reason but would fire some times and not at all is it normall for the wiring loom to be in between intercooler and manifold now theres a knock from engine wen trying to start asuming its a failed starter but starts first time with a bump start then squeaky belt pretty sure its the power steering belt 😬 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted August 22, 2016 Share Posted August 22, 2016 What year / version is it ? As I've got a few pics of the engine loom attached to a v3/v4 inlet manifold. Search for the thread for " classic ecu self code check function " in the tech section on here . As and codes should be stored and you can read them yourself in a sort if morse code flashing of the eml light [emoji6] If it's not broke .....upgrade it 😊 1 Quote Link to comment Share on other sites More sharing options...
Wulbur2000 Posted August 22, 2016 Author Share Posted August 22, 2016 99 turbo 2000 will have a look read up on the morse code like diagnosis will keep u posted not up to speed fully with it all yet all fun n games at the moment pain in the back side tbh 👌🏻 Quote Link to comment Share on other sites More sharing options...
Mark D Posted August 23, 2016 Share Posted August 23, 2016 My friends starter done that, would give some knocking noises. Looked like a bit of metal chipped off the casing that held the 'spinning bit' in on the 'pointy' end of the starter, causing the 'spinning bit' to wobble Sent from my iphone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Piggysniffer Posted August 23, 2016 Share Posted August 23, 2016 7 hours ago, Mark D said: My friends starter done that, would give some knocking noises. Looked like a bit of metal chipped off the casing that held the 'spinning bit' in on the 'pointy' end of the starter, causing the 'spinning bit' to wobble Sent from my iPhone using Tapatalk Lols, sounds like me explaining summat to the wife haha 2 Quote Link to comment Share on other sites More sharing options...
Gambit Posted August 23, 2016 Share Posted August 23, 2016 1 hour ago, Piggysniffer said: Lols, sounds like me explaining summat to the wife haha Quote Link to comment Share on other sites More sharing options...
Wulbur2000 Posted August 23, 2016 Author Share Posted August 23, 2016 Makes knocking noise while cranking engine wont fire up unless bump started replacment the only way forward i think 😂😂😂😝 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.