Hi guys, 

I'm into my first week and loving my blobeye WRX so far. Just wondering which is the preferred code reader for these? I've got an old vagcom from my VW days but I've no idea what works best for Subaru.

Also, I've seen a touchscreen to replace the stereo which took a feed from a Bluetooth plug on the obd so things like oil, boost, coolant etc could be shown. I'm not sure it was on an Impreza though. Have any of you guys heard of this and know where to look?

Thanks.

If you've the vagcom cable all you need is free ssm2 available off the web, that will give you access to loads of stuff but obviously need the laptop in the car, quite a few member use the torque app and a cheap reader off the bay

Sent from my SM-G930F using Tapatalk

Spot on, thanks for the advice 

Oh You'll need one that ISN'T elm32 protocol as won't work

Sent from my SM-G930F using Tapatalk

Stants have you got any links as I want to make sure I get the right one for a 02 bug sti

Many thanks in advance

Sent from my GT-I9300 using Tapatalk

I use Torque app with cheap OBD2 reader. But I'm not bothered about any display (I have Android stereo), use it only for reading codes

Is there a good app and reader for the iPhone/iPad?

Well I'm no longer just looking for a code reader, I need one lol. Eml came on tonight.

Can anyone add further advice on these points?

On 18/03/2017 at 2:37 PM, stants said:

If you've the vagcom cable all you need is free ssm2 available off the web, that will give you access to loads of stuff but obviously need the laptop in the car, quite a few member use the torque app and a cheap reader off the bay

Sent from my SM-G930F using Tapatalk

Ive tried looking for free SSM2 but every link I try is a dead end. Any suggestions where I can find a copy?

On 18/03/2017 at 9:27 PM, stants said:

Oh You'll need one that ISN'T elm32 protocol as won't work

Sent from my SM-G930F using Tapatalk

Would ELM327 work? I've seen a few of these on eBay but don't want to pick up the wrong one.

 

Again, thanks for the help guys.

I use this one on my Blob and it works perfectly!

https://www.amazon.co.uk/Stoga-CAN-BUS-ENGINE-SCANNER-Diagnostic/dp/B005FOIC3I/ref=sr_1_4?ie=UTF8&qid=1491838991&sr=8-4&keywords=obd2+reader

For a blob you'd be better going for the torque app and a Bluetooth dongle. I think it's the best set up. I use it on the "family" car and works a treat. I think the dongles are all under a fiver and the app roughly 3-4 quid.