Jump to content

Hello Everyone!! 2016 wrx sti


 Share

Recommended Posts

Hi Everyone im Chi im based in the South east area London. I recently purchased the Subaru Wrx Sti 2016 model and i have to say im really excited about the future mods i have for this car.  Im pretty new to Subaru really need some good advice about maintaining and mods to achieve the 400hp mark without needing to rebuild. 

 

IMG_20200206_161641_782.thumb.jpg.f9bc61813f9b1cbcfc3a6964df12b11d.jpg

 

Edited by Scoobychi
Link to comment
Share on other sites


Might be worth checking the CS400 spec as a reference, 330 340 on standard sti internals is pretty reliable so as Tidgy has mentioned you may be looking at some upgraded internals

Link to comment
Share on other sites

21 hours ago, Jay762 said:

Might be worth checking the CS400 spec as a reference, 330 340 on standard sti internals is pretty reliable so as Tidgy has mentioned you may be looking at some upgraded internals

cs400 was a forged engine from factory

Link to comment
Share on other sites

Just seen a post on the book of faces about a tuning company in the US (Boosted Performance Tuning) that has managed to get 500whp (At the wheels) on a 2019 sti with stock internals.

The turbo was replaced along with supporting mods there but the tune has x3 key factors:

1. The 2019 sti comes with 'stronger pistons'

2. Running E85 mix

3. The tune has been done sensibly with very little torque generated low down in the rev range so the stock internals are not over stressed, higher up the range full power is dialled in.

 

Link to comment
Share on other sites

36 minutes ago, Jay762 said:

Just seen a post on the book of faces about a tuning company in the US (Boosted Performance Tuning) that has managed to get 500whp (At the wheels) on a 2019 sti with stock internals.

The turbo was replaced along with supporting mods there but the tune has x3 key factors:

1. The 2019 sti comes with 'stronger pistons'

2. Running E85 mix

3. The tune has been done sensibly with very little torque generated low down in the rev range so the stock internals are not over stressed, higher up the range full power is dialled in.

 

thats the US and they are well known for pushing them to destruction and just replacing the engine as they are cheap as chips. Also WHP is calculated differently and is roughly BHP flywheel figure, so 500 at the wheels is around 625 ish at the fly, not a hope in hell of a stock 2.5 doing that, maybe for a couple of dyno pulls, but thats it.

Be very very wary of any information you get on Facebook as its a well known for dodgy info and cowboy tuners/mappers

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support