Jump to content

How safe (or not) is it to do this


Bouncer
 Share

Recommended Posts

if the head has been warped in the process you are just making things worse as the fitting is not true which means it could move causing even more damage as metal meets metal  - the temperature is from the coolant in the radiator that will not give you much of an indication as to what is happening to the rest of your engine

 

my advice would be not to drive it - sorry, probably not what you wanted to hear

Link to comment
Share on other sites

I would catch the bus.

My brother's h/g went on his punto drove it for a week before he knew any different (he's. Rebuilt it for him inc head skim all new bolts etc, lasted about a week before it blew the bottom end apart, a load of rubbish had made its way into the bottom during the week he used it

Link to comment
Share on other sites

I asked someone that works with these engines and said there's no overheating, no mayo ect, they said it in that case it would be fine, but if it's been overhearing (it hasn't, well started creeping a few weeks ago but not right in the red)

Link to comment
Share on other sites

If your gasket goes and you know as soon as it's gone I'd say drive it home and fix it with just a new gasket and bolts, if you don't know when it went I would get the head skimmed as the more you drive it the hotter it will get regardless of water temp or level, the heat will then warp the head or even worse cracking the head, if you've been driving it since it went I'd get it cracking tested and skimmed when it's off

Link to comment
Share on other sites

its very easy to say yes do something when you don't have to live with the consequences - if you drive it and end up causing more damage is he going to take accept any responsibility for it? - I would wager not.

Link to comment
Share on other sites

No if he's telling you its fine to drive it now, would he buy it off you knowing you've been driving it with a knackered head gasket

Or as he works with them, at the moment it's about 2-300 to fix it, when the heads warped or cracked you may as well double that, and the labour is going to double too, if he's going to be fixing it then he will be able to make more money from you the more damage that's done

Link to comment
Share on other sites

Id only drive it If you're gonna eventually scrap the engine (fit another one)and can afford the breakdown recovery (aa member ) as it sounds to me like the head gasket has blown between water and cylinders , which could lead to heat cracking /pitting the head or blowing from water to oil as well .which would fubar the bottom end due to water and oil mixing without you knowing untill you go to top it up.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support