Just got the rest of my engine plastics hydro dipped in gold carbon @aqua grapics in blackwood Gwent done a spot on job, now just to change all the bolts to stainless steel, proper clean ready for first show.

Look's spot on mate real nice job. I think it's made the bay look real clean and crisp. 

that looks awesome the shiny bolts will finish it off a treat

I been looking into hydro dipping looks smart

:) great result

yea that looks the bawls mate

that looks great, very tidy B)

That looks sweet.

Can I get a link to the ppl that did this for u please pal or anywere else that does this. Thanks.

That looks ace,

Very impressed :-)

Just got the rest of my engine plastics hydro dipped in gold carbon @aqua grapics in blackwood Gwent done a spot on job.

I obviously read that pal but unable to find anything online hence why I asked for a link.

http://www.aquagraphix.co.uk

Have missed something here?

Thanks appreciate that.

Have missed something here?

Dezmond wants some wind deflectors in carbon but didn't want wrapped ones so was on about hydro dipping so Pete pointed him to your cover bay parts to show him how cool it looks :D 

You will need to read other parts of the forum to keep up mate ;) 

That looks good I'll be having part done when I get a impreza, an old friend of mine has started up his hydrographics dipping, if anyone's from the midlands and wants quotes I'll forward his details :)

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Must do better read all posts,

Thats the spirit mate ;)

I don't mind people having a sip of water in between either :) 

Just got the rest of my engine plastics hydro dipped in gold carbon @aqua grapics in blackwood Gwent done a spot on job, now just to change all the bolts to stainless steel, proper clean ready for first show.image.jpgimage.jpgimage.jpgimage.jpgimage.jpgimage.jpg

Did they take out the chicken wire and logo or did they mask it up?

 

Looks stunning by the way, pity you can`t drive around with the bonnet up

I gave them the bare engine cover, came apart quite easy, thinking of changing the mesh to another colour, but to busy wiyh work a moment.

I gave them the bare engine cover, came apart quite easy, thinking of changing the mesh to another colour, but to busy wiyh work a moment.

Is it just held on with those top 2 clips?

Yep 2 pop out on top hooked on the front takes seconds to remove, wire mesh a little fiddley , badge double sided tape

All - righty then! I've got the stuff from Ebay and I'm going to give it a go.

Sent from my Superior Galaxy S 5 using Tapatalk

Best of luck, I tried to do it on a galant vr4 engine cover, after the third attempt I took it to the kit supplier to do who took three attempts alright in the end, but that was 6 years ago , kits are a lot better now, prep is very important, primer and top coat very important must be clean and flawless, also water temp, I think the house bath maybe to small for engine cover, but hey good luck looking forward to see the results.