Ladybug

Use a gizzmo

Nicely done looks nice and neat :)

Will have a peep later on savage but I'm a busy lady hahah as in work :) Just sneaking a quick min or two to reply on here :) Looks a clean car tho

Have you tried cleaning the boost solenoid aswell as they get bit gummed up over time quick squirt of wd or brake cleaner down both outlets usually helps

Yeah just spotted the standalone map sensor just helps to know Take it all the settings on the power commander are ok in terms of boost setting etc Been a while since used an apexi tbh

Also as temporary measure try looping the pipe from the wastegate actuator straight to the nipple in the turbo compressor intake This will check your turbo is boosting up to wastegate pressure (std boost) Will also help to eliminate were the problem actually is

Take it your using a apexi ecu ?? Savage

Don't run any on mine. Lol and love the waste gate chatter ;) sounds good @ 1.5 bar of boost :)

You got 4 pots on it or not as std ??

Also check the steering rack universal joint by the brake servo nr the turbo ,as the heat drys it up making your steering stiff and notchy Happened to both my cars and easily sorted with a spray of wd40

You should find your ecu pinout here https://www.xcceleration.com/pinouts.htm Open whichever diagram is for your car and check what the location of the boost solenoid wires are on the pinout !!! Use a multimeter to check for continuity by putting one probe in the correct pin on multiplug then put other probe at the boost solenoid plug end ,multimeter should beep if ok and repeat for the other wire on solenoid plug too This should tell you if the wiring from ecu to the solenoid is ok

Yeah the c brace :) Have one of those but it does have some surface rust but nothing serious and the ends like most are a little crushed from goons jacking it up on them , but still pretty good mate

Nope it's in good nick from my own 3 owner car that I've broke up ,and just to check you mean the one that holds rack ? Or the c shape brace ?? Have both either way but wanted to check lol The one that holds rack is in good order no rust from what I can remember and in good nick but will check

I have one here off the car and ready taken from my own 52 bug wrx if your still after one ??

Just buy a cheap obd code reader from evil bay only cost about 15 and will save ya a fortune and give you any fault codes too

Yeah was going to buy a mica red one before my current one but ended up falling through but it's a nice colour :) So take it your after panels ??

Yes you can modify your old bumper to suit carefully or just buy a blob rear bumper but the wagon bumpers are different to hatch too just to make it more complicated doh !!

Have one here if ya get stuck lol

He even put heads and block in my dishwasher too lmao Chips and food tasted bit funny for a week or so after hahah

Although to be fair he hated me as he said subaru engine is the most awkward engine ever to work on lol Still joking aside made a good job of it and didn't cost me a penny either :) Well hmmmm ......... Infact just leave it their eh haha !!

Yeah he's ok really lol Occasionally I let him out of his box to play hahaha !!!!

And hawk lights at rear will fit a blob but you need bumper too as has the little half moons cutout on them for the lights

Saloon and hatch are different pal

I have those jdm lights for sale if your after a set as also have the morettes too :)

Sure I've got camber bolts on mine front and rear and look the same to me