Piggysniffer

Starting to get bits on it now 🙂, that killer b pickup is a lot of money for a small thing, spose its peace of mind tho... Gonna get heads stripped this weekend, the baffle in the sump has a crack at one of the mounting points (same as the one on my car, must be another scooby thing) so gonna tig that up tomoz before I fit it

Cheers mate, I got those ones, it's the exhaust ones I need, the ones without the avcs, I think I'm gonna take them off my engine when I pull it

It's got 106k on it now, I've done one headgasket, I presume it's the other, is there a set time for a scoob hg to last, they seem to suffer from what I read, just can't see the point in spending any money or time on this lump, if I have to pull it it may as well stay out till other one is done 😕

Oh, and I need two new ceramic ? Cambelt pulleys as I broke both getting them off, whoever had fitted the retaining bolts had used locktite on all 4 pulley bolts, I had to weld 19mm nuts to the Allen bolts as they would not come undone with an Allen set and beaker bar, just destroyed the bolt head, not a lot of fun that day lol

Oil pump, cambelt kit, clutch, turbo, uppipe, flywheel (probs use one from my engine and get it skimmed, I think that's mostly it, gotta lap valves, fit new stem seals maybe get heads refaced/skimmed and get head stud holes drilled out to 14.2mm, I'm sure there's more tho lol oh, gonna do tumble valve delete too will order oil pump this week, was told to fit rcm 11mm by builder, so that what it'll have gotta find out about cambelt as want to be up near 380-400bhp and have read that probs need uprated belt ?

Looks like headgasket has failed/is failing on my scoob, gonna try and nurse it along with kseal etc as not really at a point to get this done but if it goes good style then this may have to be brought forward (credit card taking a few broadsides) (accompanied by some very sideways looks from the wife)

Gulp....... 🙈

Throwing some more F@cKS into it due to headgasket failure...

Good to know ! Thanks mate

Hmm, think it's headgasket that's gone and pressurised the rad and split it, have chucked some kseal in it and found a second hand ally rad for £80, just need it to keyp going for a few more months on this engine 😳

Yes, did read that savs, may order two sets of supertech then and use them on both, maybe the seller will do 16 exhausts

Pick up arrived today, so that can go on with sump, then can get on with heads and porting headers, and get them fitted

Couldn't find one on there mate

They are out of stock in their site 😕 Race spec performance is the one I'm seeing on the bay, don't know if they are any good

The eBay jobbies are £129, will have a look at japspeed soon as I've finished applying the two part steel rad weld gloop/epoxy type thing

Thanks mate, forgot all about them, was only on their site yesterday lol

Hi all radiator just gave up the ghost in my hawkeye wrx, are any of these ally eBay ones any good or anyone know a good place to get one

Ok mate thanks, seems the way to go

Are these any good, obviously wanna do the stem seals when I do the heads, do I stay oem or go uprated if that's what they are

I'm reading that these trick up pipes are not just 2 or 3 bolt flange, but are actually made to the requirements of the turbo/set up you have, everyone being pretty much bespoke to a degree, is this actually true

Cheers mate, this uppipe lark is a pain up ze arris

What uppipe is that...

£85 posted

What about fog light covers for a japseye....😊

Long as the pain don't outweigh the gain lol 😆