Jump to content

GMInsites WRX Hatch


GMInsite
 Share

Recommended Posts

Hi everyone this is my first Subaru and first Japanese car and it has been a few years since i have had a petrol turbo.

 

I was looking for a while when this one came up with a decent spec and a awesome price so i snapped it up within an hour of the advert being put up.

 

Its a 2009 WRX Hatchback

65,000 miles

full service history

blah blah blah

 

Now onto the awesome bits.

 

Current modifications:

Pipercross Viper Induction kit

Forge Recirc valce

Powerflex adjustable console bushes

BC Racing coilovers c/w pillowball top mounts

Ultra Racing Strut Brace

K-Sport 330mm 8Pot forged calipers with grooved disks and ferodo ds2500 pads

Perrin center exhaust section

Blitz back exhaust section

Carbon fibre alternator cover

Wind deflectors

 

Modifications to come:

OZ Sparco Tarmacs 18x8 (on order)

225/40/18 AD08Rs (on order)

Blitz stage 2 racing clutch (fitted monday)

Perrin shift bushes (on order)

Wing raiser kit (on order)

 

DC447266-0DD2-4A4C-A0FA-8D83DD47EB3A_zps

 

D287F4F0-1991-4E44-AD83-D5B7E133ADFF_zps

 

11101827_1022568134437352_73534290358899

 

11082525_1022568091104023_51992435426383

 

08DFB119-7C97-4061-90CC-1FA0D8DC39AC_zps

 

11021136_1022568107770688_36162476666893

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Link to comment
Share on other sites


Little update:

 

Clutch and tyres have arrived :).

 

Clutch is getting fitted monday and my wheels have been shipped from Italy so the wheels and tyres should be on the end of next week after the wheels get ceramic coated by MKDetailers.

 

Also ordered a decat pipe and a sports cat as its cheaper to modify the decat pipe than buy a downpipe with sports cat. 

 

39A59AE1-13F8-414A-BCF2-1A9E85776DF2_zps

  • Like 1
Link to comment
Share on other sites

I am going full out ready for my trip to the ring in 3 weeks time, can not wait to get some laps racked up in the Subaru.

 

Another little update, due to the high volume of thefts now happening ive decided to get a Tracker fitted so this will be done next week :)

 

Thanks for the comments guys, need to give a shout out to Unit18 Automotive in Milton Keynes though they have been incredible supplying and fitting the parts and you should check them out as they are a supplier for all the parts i have used :)

 

Especially those KSports Nevell they offer free fitting on most packages ;)

Link to comment
Share on other sites

Salsa-king i have already bought a set off of you and i asked a professional tinter to fit them who then put a hole through them :(

 

Tidgy iirc these clutches are for up to 400bhp which is my goal. Remap next week hopefully once the garage i use receive his ecutek stuff so hopefully pushing low 300s.

Link to comment
Share on other sites

Salsa-king i have already bought a set off of you and i asked a professional tinter to fit them who then put a hole through them :(

 

Tidgy iirc these clutches are for up to 400bhp which is my goal. Remap next week hopefully once the garage i use receive his ecutek stuff so hopefully pushing low 300s.

 

 

muppet, how did he do that, cover heated it? you only need a warm hair dryer.

 

soapy water, a vinyl squeegee and hair dryer is all you need.... and a bit of patience. I did mine ok. trimming the edges are the tricky bit ;) I whipped my clusters out to do that. but fitted while on the car.  

Link to comment
Share on other sites

  • 1 month later...

Ok update.

 

So bunch of parts waiting to be fitted which include:

Grimmspeed Intercooler

Deatschwerks 340 fuel pump

Mishimoto thermostat

Mishimoto X Line Rad

Mishimoto Fan shroud

EBC Ultimax UCR rear discs

TRW rear pads

 

Got another trip to the ring next weekend so hopefully get it all fitted for then

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support