March 21, 201411 yr Author Alryt looks like the parts on mine are mixed up by that article I have a phase2 inlet so will that not fit a v3 engine Sent from my iPhone using Tapatalk
March 21, 201411 yr V1 v2 (phase 1) and v3/ v4 (phase1.5) heads inlets are the same patern so any v1 to v4 inlet will fit any v1 to v4 heads. I have v1 (phase 1) heads bolted to my v3 inlet . you just have to use the correct version inlet , injectors, auxiliaries to match the phase of the car/loom . v6/v6 (phase 2 ) head/ inlet patern is different to v1 to v4 so won't fit but , you can still use the injectors with "phase adapters"
March 21, 201411 yr Author Thanks for all info will have to look see what heads I have have to change head gaskets anyway Sent from my iPhone using Tapatalk
March 22, 201411 yr Author Spoke to boy today it's a phase2 sti engine it's ver 3 block ver5 heads and inlet he has 3 sti engines in bits a ver3,ver4 and a ver5 that's were the confusing in parts but says I will have parts to complete a sti so happy enough with that might be mixed with v3 and v5 Sent from my iPhone using Tapatalk
March 23, 201411 yr Author stripped do I have to take fuel rails off can I leave them in and cover up holes with tape and paint it Sent from my iPhone using Tapatalk
March 30, 201411 yr Author finally got round to painting my inlet wasn't too sure about colour to begain with but like it now looks good what use think Sent from my iPhone using Tapatalk
March 31, 201411 yr Have to say its a bold colour choice but has turned out beautiful. Think it will work very well.
March 31, 201411 yr Author Cheers thought I would be different lol Sent from my iPhone using Tapatalk
March 31, 201411 yr Author Thanks and yeah anything I can really to tidy it up May aswell while engines out not what can all be done alternator cambelt cover etc Sent from my iPhone using Tapatalk
April 1, 201411 yr Author Was round at it today got steering rack in and started pluging in some wireing Sent from my iPhone using Tapatalk
April 1, 201411 yr Author Been thinking that myself hopefully none lol it's getting there slowly tho Sent from my iPhone using Tapatalk
April 2, 201411 yr Author started building inlet back up nearly done got intake hose that goes underneath to put back on after a silicone one if there's any for sale it looks a lot better quite pleased the way it's turned out doin it myself Sent from my iPhone using Tapatalk
April 9, 201411 yr top job - can see you replacing those hose clips with shiny ones now you have a new pink backdrop ;)
April 9, 201411 yr Author That's exactly what I've done now new shiny jubilee clips Sent from my iPhone using Tapatalk
April 30, 201411 yr Author Putting my scoob back to facelift like it supposed to be got some crystal headlights and facelift grill can't wait to get them on will look well smart also got a bonnet to swap with mine here's a pic Sent from my iPhone using Tapatalk
May 1, 201411 yr Looks like a good project this, liking what you have done with the inlet. I've been thinking about stripping mine down and giving it a really good polish :)
May 1, 201411 yr Author Thanks will be good when all finished be a while tho and am surprised with how well the inlet turned out just halfords cans and gunk too clean it Sent from my iPhone using Tapatalk
May 9, 201411 yr Author Been round for few hours today had to swap ignition barrel from another rack to my one for a key for it thought I would get away with whole rack straight swap but they were diffrent didn't fit, that anti theft bolts on ignition barrel are a pain to get off got there with punch and a hammer just got wheel and trim to go back on Sent from my iPhone using Tapatalk
May 9, 201411 yr Author And forgot fitted my facelift bits just got to swap bonnets next time am over looks a lot better starting to look like a car again Sent from my iPhone using Tapatalk
Create an account or sign in to comment