stants Posted December 26, 2014 Author Share Posted December 26, 2014 And on the hunt for a thicker rear arb got a couple of breakers getting back to me in the new year Quote Link to comment Share on other sites More sharing options...
stants Posted December 28, 2014 Author Share Posted December 28, 2014 Front and rear droplink pic for rick as 'm lazy when it comes to posting pics of work done lol Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted December 28, 2014 Share Posted December 28, 2014 About time lol.how much was the blanket Quote Link to comment Share on other sites More sharing options...
stants Posted December 28, 2014 Author Share Posted December 28, 2014 Haha I know never have my phone with me when I'm working on the car, 83 quid mate, it's quite thick and well constructed. It was a toss up between that one and one of the ptp blankets the cdf ones are 120 ! I'll hopefully putting it on tomorrow Quote Link to comment Share on other sites More sharing options...
stants Posted December 29, 2014 Author Share Posted December 29, 2014 Fitted Quote Link to comment Share on other sites More sharing options...
Steveuk260.Esq Posted December 29, 2014 Share Posted December 29, 2014 Hmm mayby its just me but isnt that U cut out is suppose to be for actenuator arm ? 1 Quote Link to comment Share on other sites More sharing options...
stants Posted December 30, 2014 Author Share Posted December 30, 2014 That's what I thought but when you pull it around it doesn't align, looking at pics of other installs the cut out is to allow the bottom to fold round the stud so you can push the fasteners right under the collar of the up pipe. It says it's for all wrx/sti turbos so a Td05 or a vf series is a little bit bigger and maybe aligns slightly differently? Quote Link to comment Share on other sites More sharing options...
stants Posted December 30, 2014 Author Share Posted December 30, 2014 looks almost the same, it could do with being a little tighter on fasteners 1&2 but it's on and is getting a bit more pliable the more I worked it, I couldn't be bothered with the turbo gasket change so when I eventually get round to it I'll tighten it up Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted December 31, 2014 Share Posted December 31, 2014 Is the heat blanket working Adam Quote Link to comment Share on other sites More sharing options...
stants Posted December 31, 2014 Author Share Posted December 31, 2014 Yes appears to be, not had chance to do more than about a 5 mile journey at any point this week so not had chance to see if I can tell the difference in claimed spool up increase but it's keeping the turbo hot and engine bay cool, I can touch everything around the turbo and blanket. Quote Link to comment Share on other sites More sharing options...
stants Posted January 8, 2015 Author Share Posted January 8, 2015 Group n bits turned up today Found out today someone had stolen my jack from work Ghetto makeshift solution New mount in place Old ones looking a little haggard Quote Link to comment Share on other sites More sharing options...
stants Posted January 8, 2015 Author Share Posted January 8, 2015 This will be going in when I've run the tank dry enough 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 9, 2015 Share Posted January 9, 2015 Nice one stants [emoji106] I've got bushes, mounts and maybe a anti lift kit on my (never ending) list of what to do next [emoji6] How much did the group n stuff cost ? Quote Link to comment Share on other sites More sharing options...
quit Posted January 9, 2015 Share Posted January 9, 2015 so pretty those fuel pumps... and no one will see it ! 1 Quote Link to comment Share on other sites More sharing options...
stants Posted January 9, 2015 Author Share Posted January 9, 2015 Cheers mate, £106 from scooby parts I forgot to ask for o/c discount [emoji35] but free shipping at the mo so swings and roundabouts. Only problem I had was getting the rear crossmember bush to sit in properly, on bolt has gone in further on one side, by a couple mm. Even after dropping it out and reseating it wasn't playing ball so did it up and I'll have a look next week see if it has squashed into place. I was worried about the torque values given for retightening, something like 70nm for thethe front 35 for the gearbox and rear crossmember then 107 for the 19mm outer arms ? The 35nm values were ok but I would have sheared the bolts off the higher ones, so just did up to what it felt right then then another quarter turn All in great upgrade, feels like a new car don't have to give it a stir when going for reverse now [emoji51] Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 9, 2015 Share Posted January 9, 2015 I generally use a dab of threadlock if I'm unsure of the torque settings and ,as you say, just go by feel (que gambit lol) my 6 speed has the ppp short shift and selection is fine but during "lead foot" I do feel a slight pull on the gearstick when the boost comes in. So I've been looking at the "hardrace" engine and box mounts and various types of bushes and diff braces . Quote Link to comment Share on other sites More sharing options...
stants Posted January 9, 2015 Author Share Posted January 9, 2015 I was going to lock them but after seeing how little force it took to release them I figured it didn't really make much difference as if they were going ro shake loose they would have done by now. Mondays job is the fuel pump all being well so i'll inspect them while i'm at it. One side effect is that going into gear the engine has a little idle fluctuation now for some reason, fine in neutral though ? thought the clutch was slipping but after the 'in gear stall test' seems to be fine. Reset ecu this morning so I'll see how she is. Bit more nvh but nothing severe Engine mounts are next on the list. Along with some nice front discs and better pads, maybe some braided lines Then I can start thinking about mapping [emoji51] 1 Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted January 9, 2015 Share Posted January 9, 2015 Same mount as mine lol Quote Link to comment Share on other sites More sharing options...
stants Posted January 9, 2015 Author Share Posted January 9, 2015 Did you get the group n engine mounts too ? Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted January 10, 2015 Share Posted January 10, 2015 No mine are the hard race ones.I got them off a guy on Scooby net who had a blob eye with 450bhp going through it lol so I new they would be ok on my car Quote Link to comment Share on other sites More sharing options...
stants Posted January 12, 2015 Author Share Posted January 12, 2015 Fitted new pump today, greeted by an inch of dirt on the cover Obviously never been done horrible sock, Note the blue wire and extra earth running to a little black box ? Cue a couple of calls (thanks clive) Decision made to remove it all as had no idea what it was Nice shiny new one 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 12, 2015 Share Posted January 12, 2015 No problem adam ,if anything you taught me something new today as I've never seen one of those black boxes before either . As for that sock even the one I kept under the bed as a teenager looked in better nick than that one [emoji5] Anyways you can't keep having school days off fitting pumps and staying in cottages. .... your supposed to be earning the money for that remap [emoji6] Quote Link to comment Share on other sites More sharing options...
stants Posted January 12, 2015 Author Share Posted January 12, 2015 Ah well got to keep the misses sweet [emoji51] closer pic for anyone who may come across the same problem, Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted January 13, 2015 Share Posted January 13, 2015 I would have left it there if you didn't no what it was Quote Link to comment Share on other sites More sharing options...
stants Posted January 13, 2015 Author Share Posted January 13, 2015 Figured it couldn't be anything to bad, it comes out of the pump and goes back into it via the earth so no way of fitting the new one unless I spliced into the connector. So the old black wire went to the earth on other side of pump and the black box earth wire connected to it. Along with the blue wire coming from the top of the pump. The guys as sheff subaru service reckon it maybe a voltage stabiliser, the only other answer I've found is that it stops sending false signals to the sender, who knows. Did yours have one rick ? Anyway a hundred miles done since fitting and seems to be ok. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.