GeoffLeggy

Welcome! It's a great practical car with a bit of poke. Do you have any pictures? What sort of milage does it have on it?

Yeah too right 😬 Thankfully yes 2 bolts loosened and popped back in 1 minute job. The car did drive beautifully there and back apart from that. First proper journey since September time last year!

Welcome! You've come to the right place 😉. I hope you find what you want and don't rush is all I can say. As above what money are you looking to spend to buy it?

Picked up new wheels to give a go. On route and luckily only a mile away the rear sway bar bush popped out, sounded like the whole rear was about to fall of!

Right, gotcha. Sure I was reading somewhere about releasing inside.

Have fun clambering through the hole lol!! There looks to be a catch yes. Googled 'subaru wrx boot catch' 😀

Im not sure theres another answer.

Welcome! Sounds like a good choice! We will need pictures

More shine

Exhaust sounds perfect! Best I've heard on these.

That sounds perfect! Is it quiet on the roads there?

6 stand places left.

Like properly fk?

Looks like everyone has had a good day . I finished off my full 2 stage paint seal today on the new paint. Used a bit of JetSeal as well which seems to be excellent on first impression. Will be using it for the foreseeable polishing off of the rest of the car and additional layers of seal.

Welcome! Sorry not sure on Gary. I saw this the other day and had a good read. Just check underneath well and give it a good drive. Make sure it's a cold start, warm it up and give it a good rev on throttle body through mid range. Check no oil weep from heads as best can. Looks nice for sure though. Hope all goes well and indeed see you at some point

Thought crossed my mind initially.

Welcome! Sounds good! Do you have your eye on a specific car or age of?

Yes sorry it's a 2.5

Do the revs 'bounce' at that point or is it like it just stops dead?

Welcome!

Hi, Your rev limit should be just over 7K. Its an electronic function set in the ECU. Does you car have any aftermarket bits? Are you 100% its a limiter your reaching and not something else. Is it consistent in every gear and drives normally up to that point?

Nice job, looks really tidy!

More paint sealant gone on. More to go!

Now located in the radiator of the car behind 😂

I try fishing it out with a telescopic magnet thingy, usually works if you can avoid other bits. Also might be worth dropping off the under tray.