Any recommendations for a centre pod or side one(prefer centre) and gauges as well.New/used not to fussed.And are they hard to fit?Not silly money though.Cheers

What do you want to display ? If your ok with the basics of electricity you'llbe fine I fitted mine in about an hour.

I have depo led gauges but there are others prosport are popular too. Think I paid about 60 quid for a dual oil pressure & boost plus another 20 for a dash pod from ets racing

just the basics really.Cheers stants just had a look at ets the site doesn't seem to be working I just keep getting google adverts etc..Do you have a link?

I had sane problem try www.etsracing.com it's only a small company and he hand makes the stuff so fit may need to be trimmed.

Scooby part and world do them aslso but are a bit more pricy

You kept that quiet Adam lol any pics of your set up.Ive made my own A piller gauge holder.Finishing it off this weekend for it to be flocked

Haha, it was one of the 1at things I did when I got the carvjust to check if I was hitting correct boost and nice stable oil preasure I'll post a pic up

Found some pods but where to get the gauges-some £65 each! Christ had to have a lay down :D Then theres china cheap ones on ebay about £6 each..Dont really want them either.....

Have you thought about something like these ?

http://www.deporacing.eu/catalogue/multi/

Only have to buy one :-D obviously the price jnvludes all the senders and what not. You could prob get them on the bay for half price but you'd have to buy the eender on it's own

Stupid cracked phone !

Don't blame the phone its the operator :lol:I'll have a look at the link..Cheers

The're nice but I really want 3 gauges but they are nice.Just thought they would be cheaper...Perhaps its me-tightarse :D

Top showing just oil pressure

Bottom showing boost in middle and oil round outside.

Can be set to cycle through both at 30 second intervals

You posh tart lol.I paid £3 for mine from Japan and made my own

Lol it was only 56 quid delivered I think. These days the car is my only indulgence so I thought I'd treat myself. Only other cost were a couple of meters of vac hose and a gallery adaptor for the sender to fit into :D

still waiting for your mod updates lol

Cheers stants,ive ordered a set of 3 incl sender/sensors for £55 from uk.All I need now is a decent looking centre pod!

Pod ordered should all be here next week.. :) Heres a picture of the gauges-just went for basic looking ones

Yeah I got mine in the centre I really like them

All good mate as long as you can read the info thats all that matters, do the go amber at night if you wire them into lighting circuit?

I only went for a dual one as didn't want loads of gauges, personal preference really.

Yes they light up amber...If i cant fit them i'll have to ask someone on here :) For beer tokens

All it says is oil and water sensors included

full fitting kit with instructions

 

I ordered boost,oil pressure,oil temp..Do i need any vac pipe for the boost gauge?

I have emailed them

Maybe worth getting a meter or two as the stuff you'll be cutting into will be old and will prob split.

You will also need this

http://www.scoobyparts.com/interior/gauges-fitting-pods/oil-pressure-oil-temperature-gauge-fitting-kit if they haven't included it in the kit.

There not hard to wire in

Cheers for the link.Hopefully get an email back from them to find out if I need it of not.If I do i'll order it and hopefully everything will be there to fit as im off next weekend.Rick-how easy mate?

An idiot could do it.Its idiot proof :)

Hardest bit will be getting the blanking plug out from the top of the block. Mine was thread locked for good measuure. And the firewall grommet is a pain to get through.

May be worth cheating and getting these :D

http://www.ebay.co.uk/itm/180735824927?redirect=mobile