I see another scoob there was nice with ht autos arches and was really loud I liked it 😛haha

also a lot of other cars but

didnt really take many photos 🤦🏻‍♂️

That white hatch at goodwood has a Hydrotek sticker on the window! That company is around 7 mile from me. They do hydro dipping or water transfer printing. Really clever aswel. 

Nice pics btw aswel. Canny little rite up about the mods. 

 

13 hours ago, Marshffs said:

That white hatch at goodwood has a Hydrotek sticker on the window! That company is around 7 mile from me. They do hydro dipping or water transfer printing. Really clever aswel. 

Nice pics btw aswel. Canny little rite up about the mods. 

Ah cheers man ,, hydrotek I’ve never heard of them I will have to check them out , wouldn’t mind getting a few interior bits done , as all you have to do is look and the interior trim funny and it scratched / chips ,, I quite like the look of the zunsport lower grill but contemplating changing to the 2012 front end because my front bumper is cracked in two places and just needs a respray at least 😩 more money 🙈 

 

but hey a few more weeks past got a few more random pics trying to get better pics of the new ride hight / alignment , but I’m no photographer haha 

 

Car hit 100k the other week 

So thought I would treat her to a few lil bits from Japan parts 👌🏻 

 

 

 

Got to love some Jdm goodies ✌🏻🔰

 

A Laile . Beatrush master cylinder brace 

 

Cusco steering rack brace 

 

and some r205 / aniversery edition black side garments / fender ornaments 

 

managed to get the cylinder brace fitted almost strait away looking at the instructions was hopeless but after looking under the bonnet for 5 mins managed to figure it out ,, 

but first I waxed it up to try and protect it , always worth doing and during installation I used plenty of wd and silicon spray to protect it ,, needed a socket set twitch a bendy head for intalation but got there in the end , gave me a good chance to get every thing cleaned up under the bonnet 

 

I picked the beatrush one mainly to match in with the black / gold theme going on , think it looks ok ,, but for some reason the photos never upload in the order I want them too 🤦🏻‍♂️

The bloke who owns hydrotek is called Chris Pringle. Unsure of his prices but can dip anything from a Xbox remote to alloys. I want a inlet manifold dipping but going to mexico next month has dampened that lol. 

Looking good mate. What does the  cylinder brace achieve? 

On 4/29/2018 at 3:27 PM, Marshffs said:

The bloke who owns hydrotek is called Chris Pringle. Unsure of his prices but can dip anything from a Xbox remote to alloys. I want a inlet manifold dipping but going to mexico next month has dampened that lol. 

Looking good mate. What does the  cylinder brace achieve? 

Ah nice always good to know ..haha well Mexico I think that’s worth it mate enjoy 👌🏻 

 

The master cylinder brace brace is designed to eliminate the flex in the bulkhead and in return give a sharper more responsive brake feel , also on much older cars I’ve read reports of bulkheads failing through prolonged flexing , I think sti make a spacer and longer rod to try and stop this but is very expensive .. although on the hatch and newer braces for rhd cars are hard to come by , the Perrin , grimspeed and most others are lhd only , meaning you can only import them the main two being the liale or Cusco , think the liale worked out about £5 more expensive but much preferred the gold to the Cusco blue 

Started my japfest prep yesterday , got full fluids from opie , consisting of 

Titan 5w40 Ester engine oil 

motul gear 300 75w90 for the gear box and diff  

and some motul 5.1 brake fluid 

and some offiacl Subaru black filters from scooby parts 🙂 

changed the fluids yesterday ,and fitted my Cusco steering rack brace 

after a lot of swearing the bolts did finally come loose 😅 , considerably thicker than the oe unit and seems to have tightened the steering and reduced bump steer a lil bit although could be placebo . 

 

The parts pile is getting smaller slowly 

Car goes in today for two front tyres , Uniroyal RainSport 👌🏻 Maybe not the greatest tyres but I like them 🙂 

also getting my braided hoses fitted at garage just because I don’t want the mess on my drive tbh , and complimented by some motul 5.1 , just tomorrow left then to was and wax the beauty and get her in show going condition

So had a blast at japfest competing in the sprint test, struggled with my launch on all 3 runs but the car managed a low 11 second run so was competative , on one of my runs I was even faster than an r35 gtr 💪🏻 , 

few pics from the day 

Won’t let me upload my videos which is a bit frustrating 😕 

 

and this came today , so looks like Im going to get the car booked in at Subaru 

yup went through this the other week - I was advised it is impacting legacy models more than imprezas but if there is an issue it is an all day job to replace teh lines as rear axle needs to be dropped and the cars interior carpet needs to come out

 

24 minutes ago, Jay762 said:

yup went through this the other week - I was advised it is impacting legacy models more than imprezas but if there is an issue it is an all day job to replace teh lines as rear axle needs to be dropped and the cars interior carpet needs to come out

 

I went into the local dealer yesterday , Said it’s only takes ten mins to do the check, they had quite a few cars in then having checks done , lady said they don’t do anything unless it’s leaking , didn’t realise how big a job it was if they do need replacing ,, not sure I even trust the local dealer to undertake that sort of job lol