donnylad Posted September 10, 2016 Share Posted September 10, 2016 Hi huys I have just today got ym claire, it is the UK300 that claire has advertised on here. Lovely motor and she has done it proud. Not knowing loads about it, at the good price it was I decided to take a gamble on it thinking if it wasnt as described I would break it to get my money back, or just sell on at the same price. It wasnt as described, it was better!! This is what I think the spec is: Milltek exhaust system with decat STI intercooler STI injectors Uprated fuel pump Competition clutch VF34 turbo dump valve Silicone induction hose Remap I might have missed a few things, but will update as I remember and find out. I reken its putting out around 270-320bhp, it feels around 300. Plans for now: New break calipers on the front, discs and pads all round, 3 gauge setup in the center console Full service with all oils Cambelt change Good clean and polish I might swap the seats, front and rear for STI as the sun has baked the top of the rear seats causing them to split on the stiches. Some bits I am confident enough to do, things like the cambelt etc I am not. It is in for MOT Monday so I will update after that. Long term aim, fully forged engine, uprated box, 500bhp, track and 1/4 monster :) talking 3 years down the line though. 1 Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 10, 2016 Author Share Posted September 10, 2016 Well underneath is looking very decent, apart from the C / U brace that it failed the MOT on, me and a mate set to work removing it. I may fit an aftermarket part in there or just leave it off, unsure yet. I am aware of the insurance complications with this etc and that's why I am undecided what to do. I have driven it with it removed and it doesnt feel any different really, but it will be around 12-15kg lighter! Pics of before with it fitted, during removal and after. Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 10, 2016 Author Share Posted September 10, 2016 Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 10, 2016 Author Share Posted September 10, 2016 The next thing I need to do is replace these little plates on the rear, that have alot of rust on them. I could make new but bet there cheap as chips to buy or something? What are they called?? Quote Link to comment Share on other sites More sharing options...
stants Posted September 10, 2016 Share Posted September 10, 2016 Diff outrigger supports, I think Sent from my SM-G930F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
GeoffLeggy Posted September 10, 2016 Share Posted September 10, 2016 Glad to see your loving it and getting full on straight in to it! 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted September 11, 2016 Share Posted September 11, 2016 Getting stuck in then [emoji4] Nice work [emoji106] Give matt at mb development or Scott at pole position a google as both of them have recently broke a v7 jdm sti and might have the bit's in stock [emoji6] If it's not broke .....upgrade it 😊 Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 12, 2016 Author Share Posted September 12, 2016 Grrr! I remember why I went away frommodified cars now!! Just ordered Brembo front breaks new rear disks and pads for the standard caliper prosport 3 gauge pack with defi mount It is also booked in with richard henry motor sport for a full service of all filters including cambelt change. the day after andrew car will be coming to do a fast road map on it Then I will be booking it in at scooby clinic for a RR session and printout :P Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted September 12, 2016 Share Posted September 12, 2016 At least you only paid £1.5 k for it , so you can probably spend £2k on it and still have a bargain [emoji41] If it's not broke .....upgrade it 😊 Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 15, 2016 Author Share Posted September 15, 2016 Well the breaks are fitted! I have had a small problem with the alloys not fitting, I am thinking of changing the alloys but actually think these look amazing with the car! On the way home from work I just came onto boost in 3rd and what a racket, a hole the size of a 1 pence piece as per this thread That is being fixed Monday and I have ordered a second hand unit. I havnt wrapped it as it has all the heat shields on it. Because of this I have had to put richard henry motorsport on hold for a few days / week. Guages turned up though!! All in all I was absolutely !Removed! it this week when I thought the engine had gone, not sure I will get to a stage where I can drive this car without worry!! 1 Quote Link to comment Share on other sites More sharing options...
Tidgy Posted September 16, 2016 Share Posted September 16, 2016 !Removed!, i totaly missed this thread or i would have mentioned about the brakes :( Spacers or different wheels are your only options. The brembos are pretty crap as far as clearance goes. even AP 6 pots are better :o Quote Link to comment Share on other sites More sharing options...
GeoffLeggy Posted September 16, 2016 Share Posted September 16, 2016 Keep the wheels, they do look good and keep the car original in appearance. Quote Link to comment Share on other sites More sharing options...
Gambit Posted September 16, 2016 Share Posted September 16, 2016 absolute bargain that mate and well chuffed to see it still here and getting the treatment it needed I think get more money stock it's one thing I regret doing to mine now. But hey ho life goes on and it's the way I want it plus I doubt I will ever sell it. Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 16, 2016 Author Share Posted September 16, 2016 Yeah I have decided to keep the wheels. I do like them. I will get the wife to treat me to a refurb for christmas too :) Thanks guys!! 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted September 16, 2016 Share Posted September 16, 2016 It was the wheels I kept of mine unfortunately mine aren't great and going to send them for a refurb very shortly just spent £46 on center caps but I had to get the Black P1 centers oz won't make anymore in gold so hard to get now. And my originals have bust clips and I only have 3 Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 16, 2016 Author Share Posted September 16, 2016 well alot wont like them but i do! just ordered these too. http://www.ebay.co.uk/itm/like/Petrol-Hex-Wheel-Nuts-x-20-12x1-25-Fits-Subaru-Impreza-Forester-Legacy/231649913847?hlpht=true&ops=true&viphx=1&_trksid=p5197.c100068.m2280&_trkparms=ao%3D1%26asc%3D20140211125758%26meid%3D2d791d41264b49479bef88ce26311bff%26pid%3D100068%26clkid%3D8299356024995447977&_qi=RTM2108002 I have lightweight alloy ones atm and they are !Removed!! Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 16, 2016 Author Share Posted September 16, 2016 any pics of your car Gambit? What date is the jap finale? Quote Link to comment Share on other sites More sharing options...
Gambit Posted September 16, 2016 Share Posted September 16, 2016 Yeah get the alloy ones off dangerous them. Seen some horror stories of people using them. And I currently have some similar colour bolts on mine but are opened ended but replacing them with red to match the calipers and center caps. Some recent ones I have my older pictures are on old phones and some on the PC and this was the other day Quote Link to comment Share on other sites More sharing options...
Gambit Posted September 16, 2016 Share Posted September 16, 2016 japshows 2nd october Quote Link to comment Share on other sites More sharing options...
donnylad Posted September 16, 2016 Author Share Posted September 16, 2016 nice motor there mate! :) Quote Link to comment Share on other sites More sharing options...
Gambit Posted September 16, 2016 Share Posted September 16, 2016 Cheers pictures probably make it look better still needs some work but it's been a working project for 10 years now that has never ended Quote Link to comment Share on other sites More sharing options...
donnylad Posted October 4, 2016 Author Share Posted October 4, 2016 Thanks to @Xander for this pic of my car. Looking forward to show season next year and hopefully a few more upgrades. 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted October 4, 2016 Share Posted October 4, 2016 Had a little squint around it at japshow, looks like you got yourself a bargain there bud , nice choice [emoji106] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.