gary88ross Posted March 21, 2014 Author Posted March 21, 2014 Alryt looks like the parts on mine are mixed up by that article I have a phase2 inlet so will that not fit a v3 engine Sent from my iphone using Tapatalk
savage bulldogs Posted March 21, 2014 Posted March 21, 2014 V1 v2 (phase 1) and v3/ v4 (phase1.5) heads inlets are the same patern so any v1 to v4 inlet will fit any v1 to v4 heads. I have v1 (phase 1) heads bolted to my v3 inlet . you just have to use the correct version inlet , injectors, auxiliaries to match the phase of the car/loom . v6/v6 (phase 2 ) head/ inlet patern is different to v1 to v4 so won't fit but , you can still use the injectors with "phase adapters"
gary88ross Posted March 21, 2014 Author Posted March 21, 2014 Thanks for all info will have to look see what heads I have have to change head gaskets anyway Sent from my iphone using Tapatalk
gary88ross Posted March 22, 2014 Author Posted March 22, 2014 Spoke to boy today it's a phase2 sti engine it's ver 3 block ver5 heads and inlet he has 3 sti engines in bits a ver3,ver4 and a ver5 that's were the confusing in parts but says I will have parts to complete a sti so happy enough with that might be mixed with v3 and v5 Sent from my iphone using Tapatalk 2
gary88ross Posted March 23, 2014 Author Posted March 23, 2014 stripped do I have to take fuel rails off can I leave them in and cover up holes with tape and paint it Sent from my iphone using Tapatalk
gary88ross Posted March 30, 2014 Author Posted March 30, 2014 finally got round to painting my inlet wasn't too sure about colour to begain with but like it now looks good what use think Sent from my iphone using Tapatalk
Jay762 Posted March 30, 2014 Posted March 30, 2014 looks good - I can see Gem doing the same to hers after seeing this :D
Gambit Posted March 30, 2014 Posted March 30, 2014 Yep that has BoofleGem written all over it :D looking good buddy
gary88ross Posted March 30, 2014 Author Posted March 30, 2014 Thanks am surprised how good it looks Sent from my iphone using Tapatalk
Pommy Posted March 31, 2014 Posted March 31, 2014 Have to say its a bold colour choice but has turned out beautiful. Think it will work very well.
gary88ross Posted March 31, 2014 Author Posted March 31, 2014 Cheers thought I would be different lol Sent from my iphone using Tapatalk
savage bulldogs Posted March 31, 2014 Posted March 31, 2014 Tidied that up nicely gary are you gonna be painting anything else ?
gary88ross Posted March 31, 2014 Author Posted March 31, 2014 Thanks and yeah anything I can really to tidy it up May aswell while engines out not what can all be done alternator cambelt cover etc Sent from my iphone using Tapatalk
gary88ross Posted April 1, 2014 Author Posted April 1, 2014 Was round at it today got steering rack in and started pluging in some wireing Sent from my iphone using Tapatalk
Gambit Posted April 1, 2014 Posted April 1, 2014 I wonder how many of them bolts will be left over once you put it all back ;)
gary88ross Posted April 1, 2014 Author Posted April 1, 2014 Been thinking that myself hopefully none lol it's getting there slowly tho Sent from my iphone using Tapatalk
gary88ross Posted April 2, 2014 Author Posted April 2, 2014 started building inlet back up nearly done got intake hose that goes underneath to put back on after a silicone one if there's any for sale it looks a lot better quite pleased the way it's turned out doin it myself Sent from my iphone using Tapatalk 1
Jay762 Posted April 9, 2014 Posted April 9, 2014 top job - can see you replacing those hose clips with shiny ones now you have a new pink backdrop ;)
gary88ross Posted April 9, 2014 Author Posted April 9, 2014 That's exactly what I've done now new shiny jubilee clips Sent from my iphone using Tapatalk 1
gary88ross Posted April 30, 2014 Author Posted April 30, 2014 Putting my scoob back to facelift like it supposed to be got some crystal headlights and facelift grill can't wait to get them on will look well smart also got a bonnet to swap with mine here's a pic Sent from my iphone using Tapatalk
Gaulson Posted May 1, 2014 Posted May 1, 2014 Looks like a good project this, liking what you have done with the inlet. I've been thinking about stripping mine down and giving it a really good polish :)
gary88ross Posted May 1, 2014 Author Posted May 1, 2014 Thanks will be good when all finished be a while tho and am surprised with how well the inlet turned out just Halfords cans and gunk too clean it Sent from my iphone using Tapatalk
gary88ross Posted May 9, 2014 Author Posted May 9, 2014 Been round for few hours today had to swap ignition barrel from another rack to my one for a key for it thought I would get away with whole rack straight swap but they were diffrent didn't fit, that anti theft bolts on ignition barrel are a pain to get off got there with punch and a hammer just got wheel and trim to go back on Sent from my iphone using Tapatalk 1
gary88ross Posted May 9, 2014 Author Posted May 9, 2014 And forgot fitted my facelift bits just got to swap bonnets next time am over looks a lot better starting to look like a car again Sent from my iphone using Tapatalk 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now