quit Posted September 20, 2014 Share Posted September 20, 2014 If it's a classic engine with wrong turbo and you don't know what management it's running would be a good start to find out so you know what you can do It don't take much for these engines to blow or have a hissi fit Quote Link to comment Share on other sites More sharing options...
nyall7 Posted September 20, 2014 Author Share Posted September 20, 2014 Ok thanks buddy and I'm not 100% sure it's a td04 but definitely will check on that. Quote Link to comment Share on other sites More sharing options...
quit Posted September 21, 2014 Share Posted September 21, 2014 The ecu I would be more worried about , if someone has stuck a superchip in or the likes I would be ripping that out ASAP Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted September 21, 2014 Share Posted September 21, 2014 Yeah its not got a standard ECU, it can be remapped, couldnt tell you which make it is though. decat exhaust, got a boost gauge and uprated dump valve. not the greatest with cars so my apologies but slowly learning stuff No worries mate we all had to learn about scoobs at some point ,I'm still learning new stuff after 3yrs of fettling[emoji6] Lift the passenger side front footwell carpet , remove the 10mm bolts and look under the kick pannel (thats where the ecu is ) As for turbo identification here's a tdo4 showing the id markings (tdo5 markings will be in the same area) What does the boost gauge read when at full boost ? And I agree with matt that you should do a oil n filter change and book a dyno session to make sure it's running right . As it's best to have a good safe starting point before modifying . Quote Link to comment Share on other sites More sharing options...
Jay762 Posted September 21, 2014 Share Posted September 21, 2014 gives you peace of mind as well to know your starting point Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 10, 2014 Author Share Posted October 10, 2014 Hi again, sorry it hasn't taken so long to get back to you guys. The ecu is a 75 And the turbo is a vf24, not a td04!! Is that set up ok? I am going to take it for a dyno session at the end of the month :) Quote Link to comment Share on other sites More sharing options...
quit Posted October 10, 2014 Share Posted October 10, 2014 I love vf turbos mate ! Never had a 24 tho but sounds right for a sti of that age Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 10, 2014 Author Share Posted October 10, 2014 What about the ecu mate? Know much about it? Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted October 10, 2014 Share Posted October 10, 2014 The 75 ecu and the vf24 is correct for a v4 sti. the ecu can't be mapped without a esl daughter board fitted (about £550 fitted and mapped)Unfortunately I sold my 3 plug esl ecu last week (£220) . Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 11, 2014 Author Share Posted October 11, 2014 would it not just be cheaper for me to get a different ecu? Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted October 11, 2014 Share Posted October 11, 2014 Here's a few rough costs and options , all based on Second hand ecu's esl £220, apexi £350, simtek £400, alcertek £600 and syvecs wouldn't give you much change from a grand . Some ecu's would require a install, plus Mapping ( cost varies but about ) £250 + dyno . Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 11, 2014 Author Share Posted October 11, 2014 what 1 would you recommend out of them? and the ecu i have at the mo, is that worth spending the 500 and remapping that? Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted October 12, 2014 Share Posted October 12, 2014 That depends on what's your target power , budget and your preferred mappers software . you'll probably be better off emailing the likes of "jolly green monster" simon roe or any other respectable mapper and they'll point you in the right direction for your needs As there's pro's and cons with most ecu's and I've only had esl and apexi myself but would have a alcertek if budget would allow 1 Quote Link to comment Share on other sites More sharing options...
quit Posted October 12, 2014 Share Posted October 12, 2014 I like apexi set up Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 12, 2014 Author Share Posted October 12, 2014 As mine is jap import, is there any big differences in that and the uk version? As in bigger pipes or bigger fittings? Or will most things fit? Quote Link to comment Share on other sites More sharing options...
quit Posted October 12, 2014 Share Posted October 12, 2014 Pretty much the same mate only thing you will need to make sure is the correct plug numbers for the ecu Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 12, 2014 Author Share Posted October 12, 2014 Ok mate and different parts I.e front mount, always make sure they fit a gc8 and it will fit mine? Quote Link to comment Share on other sites More sharing options...
salsa-king Posted October 13, 2014 Share Posted October 13, 2014 if you're in Southampton, isn't Engine Tuner down that way? Get some more pix up so we can see what the car has on it too ;) Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 13, 2014 Author Share Posted October 13, 2014 What pics do u want mate? Quote Link to comment Share on other sites More sharing options...
quit Posted October 13, 2014 Share Posted October 13, 2014 Yeah aslong as its gc8 / classic will fit Some newage parts fit Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 13, 2014 Author Share Posted October 13, 2014 Cheers pal. Recommended air filter/box? Quote Link to comment Share on other sites More sharing options...
quit Posted October 13, 2014 Share Posted October 13, 2014 Hks panel filter Quote Link to comment Share on other sites More sharing options...
salsa-king Posted October 13, 2014 Share Posted October 13, 2014 What pics do u want mate? of the car :) front, back, side and interior.. engine bay too Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 13, 2014 Author Share Posted October 13, 2014 Yeah no problem, will put some pics up in the next day or 2. What have u got? Any pics mate? Just out of interest :) Quote Link to comment Share on other sites More sharing options...
nyall7 Posted October 16, 2014 Author Share Posted October 16, 2014 Here is some pics :) Sorry, car does need a clean 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.