aucky

woohoo finally got it working

Cheers mate will have a look at mine later today. Sent from my LG-D855 using Tapatalk

If you fit rear brembos to the hatch wrx you have to buy sti disks and find a machine shop that will drill you the 5-100 pcd into them. Sent from my LG-D855 using Tapatalk Or find a brand that do multi fitment with 5-114 and 5-100 already in them.

Were talkin about centre console inside car now jay.the arm rest inbetween seats latch that dont work so it just bouning up and down over bumps. Sent from my LG-D855 using Tapatalk

Good idea that mate.let me no how you do it i interested in doin it as well now stop it bouncin up n down. Sent from my LG-D855 using Tapatalk

Been for a nice sunday mornin drive before roads get busy. Sent from my LG-D855 using Tapatalk

I was going to do the same@DDoc with the 2 pots on rear.will save a lot of messing around and from what i have seen on youtube sould work fine. Sent from my LG-D855 using Tapatalk

Just read your comment again.do you still have standard fuel pump on car.get a upgraded bump if so and a map. Sent from my LG-D855 using Tapatalk

Welcome.nice looking bug you have their.i have a 08 wrx hatch runnin 320bhp runs great but was gettin chatter from turbo when changin gear,my boost is 14psi so to stop chatter i opened my dump valve to vent a little pressure which work but for some rrason make boost go over 15 psi and makes computer kick it into limp mode,so i closed dumpvalve again and its been ok back to 14psi.could it be something like that doin it to your car.i have read subarus sometimes dont like dump to atmosphere. Sent from my LG-D855 using Tapatalk

Their fastned on with plastic gromets about 6 inch apart if i remember right along front edge just give it a tap or a push were its lifting and you will hear it clip back in if it is just that. Sent from my LG-D855 using Tapatalk

Mine dosent latch either.it was same on my other hatch.tried bending plastic latch bit more but made no diffrence. Sent from my LG-D855 using Tapatalk

If it does turn out to be broken i have a pair black bug wagon side skirts you can av for free if you could pick them up [emoji6] Sent from my LG-D855 using Tapatalk

Have you tried bangin it back on with your hand it may just be 1 the plastic fastners needs popping back into its hole. Sent from my LG-D855 using Tapatalk

I did forget to say when removing bumper reach up from under car and disconnect your fog lights as if their like mine wire is short and will leave bumper hanging on your wires,their not long enough to reach to floor.i also drop a screwdriver down into 1 holes near bonnet lock before pullin bumper off or it falls forwards and if like first time i did mine lands on reg plate and cracks it. Sent from my LG-D855 using Tapatalk

Happy to help mate. Sent from my LG-D855 using Tapatalk

i bought a set of plastic panel removal tools for removing all plastic stuff on car,but anything like a credit card will do it,if you have long nails you can do it with your nail,just slide something thin and soft not a screwdriver and lift it a bit till you can grab it with your fingers,then pull it outwards and you will see a little square tab at each side of the pipe,just pop them and off it will come.

Glad you got it mate.their like my a** they said it would be their next working day.yeah you need to take bumper off,its only held on with clips,take headligh washer covers off then pull it at wheel archs and it will pop off. Sent from my LG-D855 using Tapatalk

Thanks matt [emoji3] will need a resistor to plug in to connector then wont i. Sent from my LG-D855 using Tapatalk

Hi if i change my steering wheel in my 08 hatch wrx to a wheel without a airbag,will it fail mot? Sent from my LG-D855 using Tapatalk

No trackin number mate.just needs to be signed for and will be with you tommorow mate.its royal mail who will deliver it. Sent from my LG-D855 using Tapatalk