aucky Posted November 25, 2016 Author Share Posted November 25, 2016 so had nothing to do tonite,so decided to start playing with photoshop again,its not great as its been a while since i used it and using mouse it crap for it but my pen not supported in stupid windows 10 anyway thought i would have a play with the rear of my car and see were it ended up Quote Link to comment Share on other sites More sharing options...
david1972 Posted November 26, 2016 Share Posted November 26, 2016 I like the quad exit pipes Quote Link to comment Share on other sites More sharing options...
Beags Posted November 26, 2016 Share Posted November 26, 2016 Interesting deleting lights. There is a good rear under exhaust areo part available. Sent from my SM-G357FZ using Tapatalk Quote Link to comment Share on other sites More sharing options...
Beags Posted November 26, 2016 Share Posted November 26, 2016 Also they do a lift kit for sti roof spoiler that looks good. You can adjust the tilt. Sent from my SM-G357FZ using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
aucky Posted November 26, 2016 Author Share Posted November 26, 2016 25 minutes ago, david1972 said: I like the quad exit pipes yeah me as well,i had a cobra with quad pipes on my other wrx hatch but looking to get the nividia Q300 this time,got a real nice sound but not 2 loud to drone. 1 minute ago, Beags said: Interesting deleting lights. There is a good rear under exhaust areo part available. Sent from my SM-G357FZ using Tapatalk was just a idea,think it would look good and i am a plater welder so making the plates wouldnt be hard for me to do and i think would look much better then my photoshop experiment. Quote Link to comment Share on other sites More sharing options...
Xander Posted November 29, 2016 Share Posted November 29, 2016 Really like the light delete. I won't know where to start but looks cool. Quote Link to comment Share on other sites More sharing options...
aucky Posted November 29, 2016 Author Share Posted November 29, 2016 Goin to make some dummy plates up first paint them blue and see how it looks in real.if it looks good welder will be out will post picture when their done. Sent from my LG-D855 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted November 29, 2016 Share Posted November 29, 2016 looks good .. Welder!! Now that's a bold move Sent from my Nokia 3310 using Tapatalk Quote Link to comment Share on other sites More sharing options...
aucky Posted November 29, 2016 Author Share Posted November 29, 2016 looks good .. Welder!! Now that's a bold move Sent from my Nokia 3310 using Tapatalk Not really mate am an apprentice trained plater welder 30 year experiance [emoji6] Sent from my LG-D855 using Tapatalk Quote Link to comment Share on other sites More sharing options...
aucky Posted November 29, 2016 Author Share Posted November 29, 2016 Good to get home from work and delivery man has been with goodies.job for weekend. Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted December 1, 2016 Share Posted December 1, 2016 looks good .. Welder!! Now that's a bold move Sent from my Nokia 3310 using Tapatalk Not really mate am an apprentice trained plater welder 30 year experiance [emoji6] Sent from my LG-D855 using Tapatalk Oh nice, not questioning your welding ability mate just, more saying there is no turning back once you've welded it . How do you plan on filling the Void when you remove the lights I had mine out the other day for cleaning it's quite a big hole. Sent from my Nokia 3310 using Tapatalk Quote Link to comment Share on other sites More sharing options...
aucky Posted December 1, 2016 Author Share Posted December 1, 2016 Will be makin a panel up weld in, smooth it,paint it.most car panels have some sort void behind them,but got gauges to do first then on with bit body work. Sent from my LG-D855 using Tapatalk Quote Link to comment Share on other sites More sharing options...
aucky Posted December 3, 2016 Author Share Posted December 3, 2016 made a start on my gauge holder today,only got as far as the first rub down with it getting dark so early.up early tommora to crack on with it,sould have it finished,was hoping to do it all tommora but looks like the gauges wont be in till next week,3 days off work so can do them then instead off rushing,couple pics of the gauge holder 1 Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted December 4, 2016 Share Posted December 4, 2016 Looking good I like that mod, I alway fancy doing this to mine , people used todo this to Astra vxrs many years ago when I had mine Sent from my Nokia 3310 using Tapatalk Quote Link to comment Share on other sites More sharing options...
aucky Posted December 4, 2016 Author Share Posted December 4, 2016 9 hours ago, kershaw-330s said: Looking good I like that mod, I alway fancy doing this to mine , people used todo this to Astra vxrs many years ago when I had mine Sent from my Nokia 3310 using Tapatalk what they like them vxr's are they reliable,bit diffrent but am thinking off getting a vxr people carryer as my daily then it can double up as a quick van as well save the scooby for best.so finished my pod today,will need another rub down and paint in summer as its too cold to do it right now,froze my rear off today,but for now its in the car,off work wednesday so will get the gauges wired up and working then,but for now think it will pass, 1 Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted December 5, 2016 Share Posted December 5, 2016 Looks really good fancy doing mine for me ;) lol how easy isit to remove the facia around the Stereo ? .. And Astra/ zaf vxrs are less reliable than 2.5 Scoobys great cars but gearboxes and sensors are made of chocolate and the corsa Is even worse their engines are made of chocolate lol Sent from my Nokia 3310 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jay762 Posted December 5, 2016 Share Posted December 5, 2016 top job - looks great!! Quote Link to comment Share on other sites More sharing options...
Beags Posted December 5, 2016 Share Posted December 5, 2016 Like it. Shame to loose to blowers o n cold mornings. If you put a single din unit in. Could you use thinner air ducks. Under it. Sent from my SM-G357FZ using Tapatalk Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted December 5, 2016 Share Posted December 5, 2016 You find unless you have the blowers set to just the top very little air comes through those vents . Sent from my Nokia 3310 using Tapatalk Quote Link to comment Share on other sites More sharing options...
aucky Posted December 5, 2016 Author Share Posted December 5, 2016 7 hours ago, kershaw-330s said: Looks really good fancy doing mine for me ;) lol how easy isit to remove the facia around the stereo ? .. And Astra/ zaf vxrs are less reliable than 2.5 Scoobys great cars but gearboxes and sensors are made of chocolate and the corsa Is even worse their engines are made of chocolate lol Sent from my Nokia 3310 using Tapatalk @kershaw-330s i will do some picture of how to get it off on wednesday when i wire gauges up as it has to come back off then,just hope its warmer then today. 7 hours ago, Jay762 said: top job - looks great!! thanks @Jay762 2 hours ago, Beags said: Like it. Shame to loose to blowers o n cold mornings. If you put a single din unit in. Could you use thinner air ducks. Under it. Sent from my SM-G357FZ using Tapatalk @Beags i very rarelly use them vents,find car warms up quicker with it set on windscreen,then i just have it on feet n windscreen and leave it their.i bought a single din radio so the gauges would fit under radio but it turned out gauge holder is longer and wouldnt fit ,never thought about moving vent up,could be a idea i could look at doing . Quote Link to comment Share on other sites More sharing options...
Jay762 Posted December 6, 2016 Share Posted December 6, 2016 The JDM aftermarket option puts them there as well - must admit I would be happy loosing the vents but hadn't thought about the single DIN idea and thin vent option the Blitz guage option for £300! https://www.japanparts.com/parts/detail/33804 Quote Link to comment Share on other sites More sharing options...
aucky Posted December 6, 2016 Author Share Posted December 6, 2016 The JDM aftermarket option puts them there as well - must admit I would be happy loosing the vents but hadn't thought about the single DIN idea and thin vent option the Blitz guage option for £300! https://www.japanparts.com/parts/detail/33804 Hmm £300 think i may have to start making them lol Sent from my LG-D855 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jay762 Posted December 6, 2016 Share Posted December 6, 2016 might not be a bad idea Quote Link to comment Share on other sites More sharing options...
aucky Posted December 7, 2016 Author Share Posted December 7, 2016 so today i fitted some LED side lights,much better now,not best picture but can see LED nice white light and old crappy dull orange on the other side. while changing the side lights i had the air filter off,was going to spray the tube black or blue same as car as think it looks out place red,so when i removed it i found with it being stuck down in the wing it was dripping wet on the under side and also had been rubbing on body work and had some holes in it so a quick trip to Halfords and a cheap £20 cone filter and bit modifying the old tube,think its much better now,also can not feel any diffrence in car with this £20 cone filter to when old £240 filter was on,also did the belt cover as well 1 Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted December 8, 2016 Share Posted December 8, 2016 Looking good . What fmic kit are you running ? Sent from my Nokia 3310 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.