Tlag Posted April 29, 2014 Author Share Posted April 29, 2014 Might have lost the burble, but i ve said nothing about the decibel level 1 Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 2, 2014 Author Share Posted May 2, 2014 Managed to fit the turbo this morning. At first glance, it looks great. Then I plonked the bare inlet manifold on top of the block and I have a bit of a problem The leg of the manifold is stopped from going into place by the air inlet of the turbo. :( I did think, when I fitted it that the turbo looked a little forward of normal. I can't see why though, the exhaust/up pipe all fit exactly, as do the brackets. I may have to abandon my stage 1 TD05 plan and go straight to stage 2. 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted May 2, 2014 Share Posted May 2, 2014 Oh gutted for you mate bizarre how its ended up like that. Will swapping to stage 2 hinder mutch at yhis stage ? Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 2, 2014 Author Share Posted May 2, 2014 Not a great deal at the moment. The gutting part is the amount of time I've put in to getting the inlet manifold ready for this set up and the fact I had to buy the TD05 which I didn't need to do. :( I've now got to spend time figuring out the air intake pipework for a rotated turbo set up and I need to buy an external wastegate which I hadn't planned on doing for a few months yet. It also means that once it's built and in the car, I've got to be really REALLY careful with my right foot. :) that could be tricky. Quote Link to comment Share on other sites More sharing options...
Gambit Posted May 2, 2014 Share Posted May 2, 2014 Yeah I would be gutted I hate feeling I've wasted my time on any project never mind one as big as this one. Well I always like to find a plus note for anything that goes wrong. So at least explaining why you needs the stage 2 now will be easier to the missus instead of a few months when its all working. [emoji6] Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 2, 2014 Author Share Posted May 2, 2014 Like your thinking. :) 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted May 2, 2014 Share Posted May 2, 2014 Hmm can't you use a single turbo legacy inlet or a impreza inlet ? If you're gonna be running maffless what about using a top entry tdo5 or will the snorkel still foul on the manifold . Let me know if you need any dimensions of a impreza inlet as I've got a v3 (phase 1.5) inlet sitting here . Or just use gambits approach and run actuated (0.5 bar) boost untill she's run in :-) 1 Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 6, 2014 Author Share Posted May 6, 2014 Had a good day on the engine today. I changed the exhaust manifold for an RCM ceramic item I had. With that fitted, the TD05 fitted perfectly. I still need a turbo to head bracket to complete that installation. I then sorted out the crank/cam cover breather pipes along with the parallel fuel conversion. That LED on to finishing off the inlet manifold and fitting it. It was at this point, I remembered I still need a knock sensor. It's probably going to be easier to take the inlet manifold off again to fit that. Still, in the grand scheme of things, that's no biggy. :) Most of what's left now is some soldering on of plugs for sensors and changing the injector plugs. Then it's on to fitting. :) 1 Quote Link to comment Share on other sites More sharing options...
Jay762 Posted May 6, 2014 Share Posted May 6, 2014 looking great buddy - will the RCM manifold now give you the burble or is that equal length as well? Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 6, 2014 Author Share Posted May 6, 2014 No, that will give me the burble back. I will save the equal length ones for the next upgrades, once it's all run in. 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted May 6, 2014 Share Posted May 6, 2014 Nice work mate glad to hear the burble was saved too even if it is temporary :) Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 10, 2014 Author Share Posted May 10, 2014 Had a cracking morning today, until the rain became torrential. Attention turned to the car itself today and prepping it for the power to come :) Knew the weather forecast so a bit of a cover was required. The parts pile began to grow :) It was out! Next was to remove everything I won't need later. To access the vacuum tank and allow fitting of the FMIC, the bumper came off next Then all the AC parts came out followed by the black solenoid box. I also had a very brief trial fitting of the FMIC before the heavens opened and our cover failed, so that was it for today. 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted May 10, 2014 Share Posted May 10, 2014 Not long now then bud :-) Are you going to get a air intake temperature sensor fitted into the fmic pipework and delete the maff with esl ? Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 10, 2014 Author Share Posted May 10, 2014 Yes, that's the plan. I need to source some more fmic pipework. I discovered the stuff I have is from a newage and would involve cutting holes in my inner wing so I'm looking for classic stuff. I have the temp sensor to put in the pipework already. Quote Link to comment Share on other sites More sharing options...
Gambit Posted May 10, 2014 Share Posted May 10, 2014 Thats it no turning back now just wait for the reverse pictures of the new beasts heart going put back in :D Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 10, 2014 Author Share Posted May 10, 2014 I know, it's getting exciting now. I've got a bit of cleaning to do in the engine bay, some wiring to install for the gauges, the fmic to sort out and then drop the new heart in. Annoyingly, work is going to get in the way for a few days now. :) 1 Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 25, 2014 Author Share Posted May 25, 2014 Well, today was installation day. Had some electrical work to do first but then it was time. :) Took a little longer than fitting a standard lump as the exhaust manifold sticks out further so dropping it in took about an hour. And as it's a Sunday and a nice dinner was calling, that was it but here's a gratuitous pic of what's waiting to surprise unwary motorists :) And, yes, I know the thermostat is missing . 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted May 25, 2014 Share Posted May 25, 2014 Looking good fella nice bit of progress [emoji106] Not long till shes purring or should I say growling ,if it's got a 3" de cat [emoji5] Sent from my GT-I9300 using Tapatalk Quote Link to comment Share on other sites More sharing options...
4758nigel Posted May 25, 2014 Share Posted May 25, 2014 can't wait to see the finished "product" would love a vid of how it sounds when/if you get chance ;) Quote Link to comment Share on other sites More sharing options...
Gambit Posted May 26, 2014 Share Posted May 26, 2014 I was just looking at the last picture thinking something missing ? Nice job though like getting the last few scan pictures before the babies been born :D Quote Link to comment Share on other sites More sharing options...
stants Posted May 27, 2014 Share Posted May 27, 2014 Making it look so easy there ! Have you decided what your doing externally yet ? Quote Link to comment Share on other sites More sharing options...
Tlag Posted May 27, 2014 Author Share Posted May 27, 2014 I was originally thinking of a wide arch job but the panels are really REALLY expensive and they are for an Impreza so need cutting to fit the Legacy. Plus, I'm really not sure how that look would work with a front bumper so I'm still in the thinking stage. One thing I do know though. At some point it will have a respray. There are a lot of very small chips in the paint and one wing dosnt match as it had some paint at some point in its life and it's the wrong shade. Apparently if you just apply the cashmere yellow, over the original yellow, it's too dark. It needs to be put over a white base. I'm also considering changing the colour very slightly. One particular model of Legacy, the S-edition was available to special order in yellow. It's only one shade darker than cashmere but with a metallic clear coat, so it shines more. I've done some research and now know the colour code so that's a possibility. :) 1 Quote Link to comment Share on other sites More sharing options...
Tlag Posted June 4, 2014 Author Share Posted June 4, 2014 6 hrs of progress later, not a lot to see really. Lots of fiddly stuff done. 2 Quote Link to comment Share on other sites More sharing options...
stants Posted June 4, 2014 Share Posted June 4, 2014 Edging coser to the end result, not a lot to see to the casual observer but to a load of geeks like us exciting :-D When do you aim to have it fired up for the 1st time ? Quote Link to comment Share on other sites More sharing options...
Gambit Posted June 4, 2014 Share Posted June 4, 2014 Most time consuming part the little bits :( But it's all progress :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.