antlockyer

Video!!!

Tried to mop up the mess the leaking radiator has caused and tried to find a part number for a JDM Forester rad.

Saw a tiny bit of coolant on the grill when cleaning the car the other day. Then yesterday saw a little under bonnet steam. Sure enough there is the smallest of leaks in the top of the rad (about an inch from the top hose inlet). I was miles away from home and chucked a can of radweld in. It hadn't stopped it yesterday but will have a look again today. With hindsight I probably could have got home with it the way it was and as I can get to the inside of the leak from the top hose hole some sort of gunk could be applied by hand. The radweld is in there now anyway, not much I can do about that other than flush it.

Got to be mint in grey. Thanks

6.5" is what I've seen all over the net. However. A lot of people had to make a spacer ring out of MDF to get the speakers to fit without interference inside the door (very common when fitting aftermarket stuff in my experience).

http://www.demon-tweeks.co.uk/Product.do?method=view&n=2015&g=242032&p=118406&c=215&utm_source=Google&utm_medium=Base&utm_campaign=Body%20Panel%20&%20Trim%20Seals&gclid=CMzZneGB3bwCFTCWtAodYngAHQ better

http://www.efoam.co.uk/closed-cell-polyethylene.php?gclid=CNfOyZaB3bwCFQ_HtAodXz8AwA Looks like the gear.

Got it, any idea where to get that foam from? I've not googled yet.

And replace it with a new one? I think taking it off and using heat, scrapers and chemicals will do the trick. Then I'll look for the right kind of foam to replace it with.

Check this out. Horrid rotting foam on the back of my intercooler. I've not seen this on other pictures. Seen it before? Standard part? Replaceable? Looks like crap so I need to do something about it.

It is only to repair a poorly painted part. Will happily take pics of it though :)

I need to get my grill repainted. 792 Arctic silver metallic apparently.

Info stored for the future, thanks.

Understand the job of the claim adjuster. They are essentially reverse salesmen. Their job is to pay out the very least amount of money at all times. They have targets to meet and families to feed. Doc your heels in and play hardball. I managed in a recent case to get the money they offered plus kept the car. This sort of deal works well for them as they meet their target and don't have to do into real money to give you what you want.

Could be the safety mechanism on the engine coming in. I think I've seen it referred to fuel cut on the Subaru. Anyway of reducing boost to test?

Nice, I must be the only one who has never had an issue with valve collets. Various much simpler tasks have been messed up though :)

V power for me. My dad is the same in his Audi.

Lovely. I've a hankering for a set of OZs the flat faced really wheels.

964 turbo did 0-60 in 4.5 with a 174 top speed.

I am a car nut. The Subaru is just another in a long line of itches that needed to be scratched.

I'm thinking the same apart from the name.

Perhaps Acadia is US Market and Flavono is Japanese Market (a casual internet search did suggest that might be the case). I really don't know anything about it but I'm a dab hand with google.

http://subaru.epcdata.ru/ I put your VIN in there.

6W2 (flavono green / slate grey)