Everything posted by aucky
-
wheel issue on 08 wrx
@craigieboy46 did you find the problem,i will be going to 18 after the winter,dont want to run into any problems as well.
-
my first subaru
-
hatchback front mesh grill
Cheers mate will have a look at mine later today. Sent from my LG-D855 using Tapatalk
-
brembo brakes
If you fit rear brembos to the hatch wrx you have to buy sti disks and find a machine shop that will drill you the 5-100 pcd into them. Sent from my LG-D855 using Tapatalk Or find a brand that do multi fitment with 5-114 and 5-100 already in them.
-
hatchback front mesh grill
Were talkin about centre console inside car now jay.the arm rest inbetween seats latch that dont work so it just bouning up and down over bumps. Sent from my LG-D855 using Tapatalk
-
hatchback front mesh grill
Good idea that mate.let me no how you do it i interested in doin it as well now stop it bouncin up n down. Sent from my LG-D855 using Tapatalk
-
What have you done to your Subaru today ?
Been for a nice sunday mornin drive before roads get busy. Sent from my LG-D855 using Tapatalk
-
brembo brakes
I was going to do the same@DDoc with the 2 pots on rear.will save a lot of messing around and from what i have seen on youtube sould work fine. Sent from my LG-D855 using Tapatalk
-
Bugeye Side Skirt reattachment
Their fastned on with plastic gromets about 6 inch apart if i remember right along front edge just give it a tap or a push were its lifting and you will hear it clip back in if it is just that. Sent from my LG-D855 using Tapatalk
-
hatchback front mesh grill
Mine dosent latch either.it was same on my other hatch.tried bending plastic latch bit more but made no diffrence. Sent from my LG-D855 using Tapatalk
-
Bugeye Side Skirt reattachment
If it does turn out to be broken i have a pair black bug wagon side skirts you can av for free if you could pick them up [emoji6] Sent from my LG-D855 using Tapatalk
-
Bugeye Side Skirt reattachment
Have you tried bangin it back on with your hand it may just be 1 the plastic fastners needs popping back into its hole. Sent from my LG-D855 using Tapatalk
-
hatchback front mesh grill
I did forget to say when removing bumper reach up from under car and disconnect your fog lights as if their like mine wire is short and will leave bumper hanging on your wires,their not long enough to reach to floor.i also drop a screwdriver down into 1 holes near bonnet lock before pullin bumper off or it falls forwards and if like first time i did mine lands on reg plate and cracks it. Sent from my LG-D855 using Tapatalk
-
hatchback front mesh grill
Happy to help mate. Sent from my LG-D855 using Tapatalk
-
hatchback front mesh grill
i bought a set of plastic panel removal tools for removing all plastic stuff on car,but anything like a credit card will do it,if you have long nails you can do it with your nail,just slide something thin and soft not a screwdriver and lift it a bit till you can grab it with your fingers,then pull it outwards and you will see a little square tab at each side of the pipe,just pop them and off it will come.
-
hatchback front mesh grill
Glad you got it mate.their like my a** they said it would be their next working day.yeah you need to take bumper off,its only held on with clips,take headligh washer covers off then pull it at wheel archs and it will pop off. Sent from my LG-D855 using Tapatalk
-
Steering wheel change
Thanks matt [emoji3] will need a resistor to plug in to connector then wont i. Sent from my LG-D855 using Tapatalk
-
Steering wheel change
Hi if i change my steering wheel in my 08 hatch wrx to a wheel without a airbag,will it fail mot? Sent from my LG-D855 using Tapatalk
-
hatchback front mesh grill
No trackin number mate.just needs to be signed for and will be with you tommorow mate.its royal mail who will deliver it. Sent from my LG-D855 using Tapatalk
-
Induction kit. To or not to that's the question
What do you want 1 for.their basiclly ok for looks and noise.if you fit a front mount intercooler you need 1 as the standard airbox comes out.if you look on youtube at mightycarmods they test them on a dyno and results show the standard air box gave the best power.my hatch has a aem on but to be honest if i did not have the front mount fitted i would take it off and go for a good panel filter in box. Sent from my LG-D855 using Tapatalk
-
What have you done to your Subaru today ?
i had a blob 2.0gx and the rad hose's from a blob wrx fitted it,so maybe these are the same mate.
-
Td04 to vf48
most usually go for a vf35 off the sti,but with the right accompanying mods and a map i dont see why it wouldnt work,your not expecting to bolt the turbo on and it give you 400bhp are you?
-
Td04 to vf48
why did you pick the vf48?
- hatchback front mesh grill
-
wheel issue on 08 wrx
what offset are the 18s could be wrong and are catching something.