Jay762

a temporary setback - but easily sorted ;)

great diagnostics - hope it sorts it

looks like the sensors in teh diagrams - I didnt know they had exhaust temp sensors

oh dear please ignore my posts then as I had forgotten you had a turbo - that diagram I have posted is clearly for an NA setup. close to the turbo is a reasonable aasumption it is No.1 sensor

does look like front of first cat then by these diagrams as well

Some links http://pro-r.co.uk/products?filter[cat][]=&filter[brand][]=&filter[model_year][]=12&filter[search]= http://www.scoobyparts.com/acatalog/HKS_TUNING_PRODUCTS.html http://www.scoobyworld.co.uk/catalog/index.php?cPath=47_66 http://www.forgemotorsport.co.uk/content.asp?inc=product&catalog=220201&cat=220201

:D :D :D :D :D

that is good for 5 windows

not a small car that, plenty of room to get up to all sorts behind limo tints

I would make that assumption as well but they are different part numbers on the website

possibly - its not too clear from the diagram but it would need to take a pick up from both sides of the engine outputs so at the manifold intersection or close by unfortunately for this model I am guessing, sorry

mine doesnt and not having had tinted windows before I was surprised how much more space I was leaving behind the car

Dont know if this helps...? from http://www.buysubarupartsnow.com/parts-catalog/subaru/forester/1999/base/2-5l-h4-gas/emission-system/emission-components looks like the manifold ??

reversing without parking sensors becomes a bit more cautious but it will certainly go with how the car looks already

try dropping them an email Email:[email protected]

Ok so had some feedback and you would only get enough to treat a 1000 litre tank from my contact - over kill I thought but here is an alternative they are called fuel biocides... http://www.ebay.co.uk/itm/Wynns-Fuel-Biocide-Petrol-Diesel-cars-boats-bike-trucks-marine-wynns-outboard-/171140555217?pt=LH_DefaultDomain_3&hash=item27d8c5a1d1

Wagonwheels is the member you could check out his posts and pics for some styling ideas

Wotcha and welcome - maybe one of the members can help you out, ill move the thread ot the appropriate section and it should get the right visibility there

brilliant - a straight forward fix, nice result!!

Wotcha and welcome Owen, removing the box and panel and replacing the lot with a cone and larger tube will give you a little more induction noise, do you have any sound proofing on the underside of the bonnet - if so you could remove that and get a slight increase in overall volume from the engine. You have named some top recognised aftermarket parts suppliers so I would say it would be more down to personal taste for looks as much as anything else I believe they do have two cats in place as standard a straight through pipe will make it louder but with the sound different exhausts will vary the tone you (again down to personal tatse) tube will give you an idea and we have had some baffle in baffle out vids posted on the forum but be aware some of the members describe rattling neigbours windows and light fittings so the potential is there should you want it. I would recommend getting a map done to complement any changes you make to teh exhaust and induction side of things. it has been discussed on here about recirc vs dump valve and the dump valve will give you a great sound (again we have threads with vid links to different valve sounds or you tube search) but will cause the car to run rich momentarily resulting in some flamage in the exhaust :P a recirc will do the same job but without the fuss so again down to personal taste One thing I would say before you spend loads on aftermarket goodies check you have a good foundation, good recently changed oil, filter and plugs as you could be bolting things on and not achieving the results you would like

yup been there with coolant, rain water and wd40 on separate occasions

speak up you younglings I cant hear a word - nurse!!! my bag needs changing!!

that is funny :D

proper result - great to hear!!

Wotcha and welcome - we also have a member from up north who put together a mean STI - he might be along to share some info ??