Jump to content

is my plate illegal ?


quit
 Share

Recommended Posts

As above,defo yes,has to be a specific size or a "pull" is on the cards.................(not that type :P )

 

Tricycles made from four-wheeled bodies, such as saloon
cars and quad bikes, must meet the normal requirements
on page 9.
Tricycles built from motorcycles must meet the rules for
motorcycles shown below.
n Characters must be 64mm tall
n Characters (except the number 1 or letter I) must be
44mm wide
n The character stroke (the thickness of the black print)
must be 10mm
n The space between characters must be 10mm
n The space between the age identifier and the random
letters must be 30mm
n The margins at the top, bottom and side of the plate
must be at least 11mm
n Vertical space between the age identifier and the
random numbers must be 13mm
Number plates fitted before 1 September 2001
The characters on number plates fitted before
1 September 2001 must meet the size requirements
shown below.
Group 1 Group 2
Number plates Traditional
fitted before number plates
1 September 2001 for vehicles made
before 1 January
 1973
Character height 89mm 79mm
Character width (except
the number 1 or letter I) 64mm 57mm
Character stroke 16mm 14mm
Space between characters 13mm 11mm
Space between the age
identifier and
random numbers 38mm 33mm
Side margins (minimum) 13mm 11mm
Top and bottom
margins (minimum) 13mm 11mm
Vertical space between
the age identifier and the
random numbers 19mm 19mm
 
info here 
  • Like 1
Link to comment
Share on other sites

Just get one made as small as the law allows.

Had this on mine for 3 years never got stopped once, if the anpr camers can read them you shouldn't have a problem

5fb3686181960e597c50cda48b0d41a4.jpg

 

 

Where did you get that made? I was going to get a 12x6 for mine as I know you can fit legal spacing on it but its split over 2 lines and I would like it to be on one.

 

I am also planning to get a 5 character private plate so I can make a smaller one line plate.

 

Thanks

Alex

Link to comment
Share on other sites

Mot tester failed me on it though as he was testing as a mx5 not an import. Divvy, I even took what ven has cut and pasted to him, plus the v5 and import docs.

Asked me if I thought I knew the law better than he did. I said obviously I did took it to another testing station flew through on the same plate [emoji51] which reminds me I may go for another small oblong plate if it fits, not a fan of my square one at the front

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share




×
×
  • Create New...




Forums


News


Membership