March 6, 20178 yr Author Just needs replacing mate i used the one in the kit pic below It allows ic pipe past but you retant the original cap see pic below Also mate when you have cut all the back of the opening below the reg plate off the bumper if you use 2 screwdrivers in the bumper holes it makes it much easier to get the cut marked up wi must of had it on and off 30 times but the result looks factory if you look in the pic below you will see a red and yellow screwdriver holding the bumper on The masking tape is still on in the above pic we used that to draw our marks on then when finished sanded the back edge so it was neat and left no ruff edges obv dont sand the painted part just the back cut edge
March 6, 20178 yr What's the black plastic bit like just under the number plate holder? Could that be cut out too? Just a thought Sent from my HTC One M9 using Tapatalk
March 6, 20178 yr Do you have the I/c spray fitted to yours, if so have you looked at moving it to front bumper for the fmic? Sent from my HTC One M9 using Tapatalk
March 6, 20178 yr Author The black plastic bit could be removed but the intercooler slopes in at the top so i thought it might look abit daft so i left it also i havent moved the i/c soray line it would be really easy but i cant see if bieng benificial as its head on with air now isnt it so abit of water wouldnt make much diffrence. 😊
March 6, 20178 yr Author Right then updated pics of the new dump valve fitted (cheap one for now till i pick the one i want)
March 6, 20178 yr Author Also today i debadged my grill to give a meaner look and also after advice from other members removed the black strip from behind the reg plate to see the fmic more
March 7, 20178 yr Author Quick update ive just ordered my coilovers so fingers crossed i can get these fitted friday and 4 wheel geo set up done 😊
March 10, 20178 yr Author Right new dv today and map tweek at scooby clinic took the car from 325 to 340bhp which was good 😀
March 10, 20178 yr Author Also had new header tank fitted and colour matched to perrin induct kit Before After
March 12, 20178 yr Author Today i fitted a cold feed to my induct kit simple job in paper pain in the !Removed! to get the pipe down the wing with the intercooler piping anyway results are
March 13, 20178 yr Getting there matey, one comment is get some mesh in front of the intercooler, last thing you want is a stone going through.
March 13, 20178 yr Author @TidgyI like seeing it tho mate so il take that risk lol What about this then.spot the problem
March 13, 20178 yr Author Yea thats right lol massively dissapointed but i bought direct so called them as my cars booked in at scooby clinic wed for fitting so there shipping a full set to scooby clinic for first thing wednesday morn so i cant complain the lady was really helpful too
March 13, 20178 yr Waaaaaaaap stututututu pop !Removed! waaaaaaap.......etc etc Sent from my HTC One M9 using Tapatalk
March 13, 20178 yr Author Edit Imagine rusty nails in an empty paint can Then add nails down a chalk board Then wen ur watching tv and the adverts come on 1000000 times louder than the programme your watching and it makes you jump. 😲😲😲😲😀😀😀😲
Create an account or sign in to comment