kayzarh
Members
-
Joined
-
Last visited
Everything posted by kayzarh
-
A&J autos, kent street, leicester, the MOT guy and me both have scoobs so you'll be looked after! (I also help out there a few days a week) -
If I was to get a fuel pump now and I had the money laying about it would be the rcm pump But I didn't, so I brought a second hand fuel cradle for 20quid posted and it was a pop in and out job. Are you sure it's the pump that's failed and not a fuse/relay? There should be two thick wires going to the fuel pump, the black one is ground and the other is power, stick a multimeter in dc volts down the holes, negative on the ground and positive on the other one and see if you're getting good voltage. And you could test the fuel pump whilst ur at it. Sent from my MX4 Pro using Tapatalk
-
That's what pisses me off about these big companies, when they screw up, we have to put extra effort to fix it for them, for free, with our time. Now if we owe them a fiver, its the end of the world with threat letters. Sent from my MX4 Pro using Tapatalk
-
Started feeding the baby milk to the fuel system man, I swear my turbo is growing 😂😂😂😂 Sent from my MX4 Pro using Tapatalk
-
okay, i found the biggest exhaust leak in the header-upipe joint, there was only 1 bolt in and the other 1 flew off somewhere and only half a gasket, its all been fixed now the car is running like it was before, more quiet than ever before actually. but im sure i can still here backfiring from being rich and yeh now that you mention it, the actual spark filament on the plugs where fine, it was just the thread and the rim that was covered in petrol. idling very smooth now and the fluctation is between +/-50 revs and any rev will hold. and sometime she is boosting at 3.5k sometimes at 4.5k. im thinking i have the tiniest vacuum leak now and some messed injectors, whats the best way to check for both of these @savage bulldogs
-
found an exhaust leak from the join of the headers-upipe, need to tighten it up and inspect
-
Error code 53 which is an immobiliser issue according to the net. So shall I replace injectors and fuel filter? Sent from my MX4 Pro using Tapatalk
-
okay, all it was is a bad fuel pump which got replaced now the car is starting and running again. i have a very lumpy idle, im running rich as told by someone, also checked my sparks today, they look to be showing sign of being rich. ive changed the maf, cleaned ivac and replaced gasket. the only time i get a error code is in the morning. i can hold the ignition for 5 seconds and it wont start it will turn, try to start a bit and then just give up. all i have to do to fix that issue is, crank the car for a sec, let off and crank again and it fires straight up. i have no cel and no error codes with the cables underneath the dash. any ideas @savage bulldogs ?
-
Ma scoob is back, turned out it was the fuel pump, also looks to be the right diff seal that has a very minor leak Sent from my MX4 Pro using Tapatalk
-
Ain't been doing much to the soobs :( got a car cover for the weekend, going to get her on some axles and underseal, planning to order a fuel pump next Sunday followed by trying to strip the gearbox out again to replace the seal. If I can't take the release bearing fork shaft bolt thingy out I'm just going to pull out my whole engine with the tranny attached. Oh and I'm also going to get a evening job soon! 500bhp by 25 is the target!!!! Ppg dog engagmemt atleast! And a 2.1 or 2.35!!! Sent from my MX4 Pro using Tapatalk
-
Changed some sparks ;) but not on ma soobs Sent from my MX4 Pro using Tapatalk
-
Is the clutch sorted or nah? Sent from my MX4 Pro using Tapatalk
-
still for sale ?
-
-
Welcome and we have a very special place for Hondas in our heart Sent from my MX4 Pro using Tapatalk
-
https://www.amazon.co.uk/gp/aw/d/B000WTHL42/ref=mp_s_a_1_1?ie=UTF8&qid=1476628484&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=Axle+stands&dpPl=1&dpID=51-hKioZmnL&ref=plSrch Axle stands which I have Sent from my MX4 Pro using Tapatalk
-
Best Jack you can get for the price easy Sent from my MX4 Pro using Tapatalk
-
https://www.amazon.co.uk/gp/aw/d/B00YCNEZL6/ref=mp_s_a_1_9?ie=UTF8&qid=1476628403&sr=8-9&pi=AC_SX236_SY340_FMwebp_QL65&keywords=trolley+jack Sent from my MX4 Pro using Tapatalk
-
Amazon and silverline tools are highly decent Sent from my MX4 Pro using Tapatalk
-
-
-
You can give me some tips before I alcantara my whole car up!! Sent from my MX4 Pro using Tapatalk
-
I have some manuals but they are in paper, so tell me what you need and I'll scan it for you Sent from my MX4 Pro using Tapatalk
-
-
