stants

Seeing there are a few more members from the west yorkshire area. Just seeing if tgeres any interest in getting a more local meet together ?

Thanks for that. Call in at some point in the future see about servicing etc. :-) Also gonna see about organising a local meet as there seem to be a few more poeple from leeds joined up

Hi mate let us know howw you get on at richard henry, they are 5 mins away from my mums so if it's a good revue i'll look at getting stuff done there instead of driving to sheff. Theres a place in huddersfield that has a hunter alignment system (cant remember the name) :-( do setup and what not for around a ton

90% of impreza parts/procedures have worked & fitted so far so i guess it will be the same. Didn't know if there was anything inbetween the scoop and plastic bit that may pop off or get lost if i"m not ready for it

Does my scoop just unbolt from the engine bay or are there some sneaky little fasteners i should be made aware of? Off to be repainted next week :-) whoop !

Matt, as in decat downpipe sorry if stupid sounding question.no boost spiking ? I'm trying to find out if running a sports cat system will work without a remap. Things have gone a bit !Removed! up so my plans have changed so can only afford to get exhaust then wait for map. Seems to be lots of conflicting info about if safe enough or not. There should stil be enough pressure in between the turbo and cat to prevent spiking surely ?

Cheers, check out the site they do any colour lettering combo you want at no cost :-) was gonna ask for the soc logo but just thought i'd plump for what i got. How much you pay for tool ? Found some little dentistry tools in my local pound emporium that with a pair odf tweezers dis the trick. Just wish i could have been bothered removing it as my back was killing after !. Slightly off topic, matt did you say you ran a de cat with no remap for a wile with no problems ? Can't find my op

Will do i've taken a pic of the cooler before fitting and will leave it a couple of weeks lift off and see if theres any difference. The mesh is quite sturdy without being saggy so hopefully if any !Removed! does get ingested through the scoop should just sit on top and not pass through. Found a couple of twigs that had worked there way down into the core and had done some damage yesterday too :-( And if any numptie trys to stick a lance down the hole again i'm hoping it will soften the blow so to speak.

I was fed up with things attacking my fins, be it man or beast i wanted to keep it intact as when i bought her the cooler was virtually unmarked/damaged. An hour of teasing the fins back upright again and 30seconds to fit :-) After uming and ahhing i plumped from this from a rally-tech.com including shipping it was half the price of the ones i found in the uk ? Anyway after a slight hiccup with customs on their side was posted monday arrived yesterday. Communication form tim was spot on and i'd recomend them and will prob buy some more bits in the future

Haha try in a luton van. Thats the only problem with the shop, it's location a stupod dead end at one end of road or a car park that tempts you in at the other before realising you have to pay to get out. They never have stock in that i want so only realy use it for the odd bit now and again. Shame really as should support, local shop for local people ;-)

Yeah the shops still going i was over there today couldn't find space to park the van i wanted to see if they had hose clips in stock

Yep it's a bit greener than the other one and when i eventually connected it all back up it says l2 12v 2watt on it. Still if i've learnt one thing today it's that whoever took the top cowl off last time didn't replace the screws !

Still no idea of size or anything else but at lwat it's a part number for anyone wanting one

Haha i just missed the 70's ;-) off to pick bulb up shortly. Just dropped car in to get ball joints done and garage has a big display/selection of tiny bulbs there may pick up a spare. Need to di ashtray light at some point

You ever on time ? Hahaha

I'm en route see you all in a bit

Lucky for some ! What should be a 40min journey takes about an hour and a half with the roadworks and traffic :-(

Well ive yet to get the fitting out. Looks like can be a bit of a pain and snap the lugs off easily. Anyway i'll post the part number up and bulb type and wattage for future reference when it arrives. Once again can't fault my local subaru dealer. No matter what i ask for. Even when it's 'one of those bolts that goes into that hole behind the thing over there they always manage to prder me the right parts. Best dealer i've come across for customer service and what not. Still i recon theres a couple of chaps working there that love the cars always a classic and & p1 parked in the car park when i go

Ive not the time to !Removed! at the mo otherwise i'd see if he could squeeze me in this afternoon. If theres pictures to be taken best try and get a wash in too !

Just got a call form subaru. Four quid inc vat will be here tomorrow :-)

Need to see how much martin will charge for a ball joint replacing mine decided to split on sat mag as well get it seen to sooner rather than later. Just gotta figure out if i can make it a worthwhile trip to sheff for that or can coinside with a new exhaust. Otherwise i'll get it done up here

Whoop :-) yeah i'll be there need to get aome biscuits on way though lol.

How much would you be willing to part with them for ? Are they 16's or 17's I'm tempted just don't know how gold would look against the two tone colour

Looks good on more modern rims d o you still have he old wheels ?