Jump to content

Getting a Gauge set up for Christmas!


cornish6544
 Share

Recommended Posts

http://www.deporacing.eu/

Next day delivery etc

Sent from my SM-G930F using Tapatalk

When I tried them they fobbed me off a lot. I ordered mine from a German seller on eBay. I'll see if he still has them

A bit pricier than some others but here it is.

Look at this on eBay http://www.ebay.de/itm/112122929717

He also has water temp versions but you lose oil pressure. Not a worthy trade.

Link to comment
Share on other sites

Would advise against using sandwich plates. Cheap versions leak and hard to monitor. You can buy a T piece that will fit into the oem oil pressure hole and it allows you to keep the oem pressure switch. For temp it's best to go for the bung that's located over #3 piston. That's the usual hot-spot due to being so close to the turbo and uppipe. You'll also need an adapter for the temp sensor as the sensor uses a different thread pattern to the engine. I'll find the link for the parts.

  • Like 1
Link to comment
Share on other sites

http://www.scoobyparts.com/oil-pressure-oil-temp-gauge-fitting-kit-pink

Link for parts you need if using the depo 4-1. Also grab yourself some wire, soldering iron and connector blocks if necessary. The wires from the gauge are rather short but you will need to wire into a supply anyway.

Link to comment
Share on other sites

  • 1 month later...
IMG_6845.JPGthis is what the gauges are reading on idle after being driven. Sorry about the picture could t get it the right way. 

My gauges read about same.then when warm and drivin my oil pressure goes up to about 6 bar,8 when first start up from cold.

Sent from my LG-D855 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support