R0llamite Posted December 17, 2014 Share Posted December 17, 2014 Im thinking of going to roger clarke as thats the closest with a RR to me Quote Link to comment Share on other sites More sharing options...
quit Posted December 17, 2014 Share Posted December 17, 2014 I paid 25 for top and 55 for bottom I think Quote Link to comment Share on other sites More sharing options...
R0llamite Posted January 17, 2015 Share Posted January 17, 2015 I managed to source two sti spoilers, 65 for top and 80 for bottom, so not too bad compared to the 100 a piece i was willing to pay, also got my alloys done in a metallic black/purple colour ready to go on; and sprayed and fitted my larger scoops, used a little left over mesh to help protect the i/c, should be putting my larger alloy one on tomorrow hopefully its just a little stubborn Quote Link to comment Share on other sites More sharing options...
R0llamite Posted January 17, 2015 Share Posted January 17, 2015 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 17, 2015 Share Posted January 17, 2015 Very nice getting them for that price. Proof look hard enough can find a bargain. Quote Link to comment Share on other sites More sharing options...
stants Posted January 25, 2015 Share Posted January 25, 2015 Is Duncan coming up on the 9th for your car at gr performance ? Quote Link to comment Share on other sites More sharing options...
R0llamite Posted January 25, 2015 Share Posted January 25, 2015 sadly i have work commitments, so its guna be another time :( got my alloy i/c on as well finally! had to use the stock y pipe though as the other didnt fit very well, stock is thinner but has a wider opening to the turbo itself at least, took for a test and was leaking boost so i addressed that then had an idle CEL light on that went when revved, tightened everything to within in an inch of its life and touch wood seems to have solved the issue, not road tested properly yet just down the back roads and you can notice the difference the alloy one makes! Quote Link to comment Share on other sites More sharing options...
stants Posted January 25, 2015 Share Posted January 25, 2015 Where did you get the ypipe from ? Been waiting on a sfs sillicone one since October but they are taking the **** Quote Link to comment Share on other sites More sharing options...
R0llamite Posted January 25, 2015 Share Posted January 25, 2015 Where did you get the ypipe from ? Been waiting on a sfs sillicone one since October but they are taking the **** just took it off the standard tmic, good job i did as the seal on the alloy was corroded anyway so i replaced it Quote Link to comment Share on other sites More sharing options...
R0llamite Posted March 17, 2015 Share Posted March 17, 2015 good news! ish, i got my sti spoilers painted and on the car they look great, took my car down to scooby clinic to be remapped and they blew it up, heater matrix went, took the HG and cooling system with it, ~£840 later no map and a broken car but i got a new heater matrix and a walbro fuel pump at least... took it down to Rotherham scoobies and had a bottom end refresh new cosworth cambelt and HG and got the car remapped by duncan graham pulling 262bhp which isnt bad for a car built with 217bhp standard, new apexi induction kit, new DV as im now MAFless, new alloy rad and hoses, will have pics soon, but now im facing dodgy idle, keeps idling at 1200 when warm so i have adjusted thje iacv and will clean it this weekend hopefully its nothing serious. other than that the car is well 1 Quote Link to comment Share on other sites More sharing options...
Jay762 Posted March 17, 2015 Share Posted March 17, 2015 Well at least it wasnt going down the road when it happened - 262bhp is a healthy figure as you have said :) Quote Link to comment Share on other sites More sharing options...
R0llamite Posted April 14, 2015 Share Posted April 14, 2015 UPDATES: Got a small reg plate and fitted my glow in the dark Jap plate to the front, got a debadged grill sprayed it 406 and fitted that too, pics this weekend hopefully! Small 2p size rust patch forming on the rear arch so im forking £300 over to have the rear quarter sprayed and wax injected into the skins. Fitted my Japenese Kei alloys, forged lightweight purple goodness, replaced the manifold with a black one and sorted, to an extent the ile issue, still creepes slightly but no were near as bad, learnt my lesson now if it aint broke dont !Removed! tinker with it! I also got a dog called Poppy 2 Quote Link to comment Share on other sites More sharing options...
Gambit Posted April 14, 2015 Share Posted April 14, 2015 Wheres the pictures ?? :) you know the rules by now ;) Quote Link to comment Share on other sites More sharing options...
Jay762 Posted April 14, 2015 Share Posted April 14, 2015 Thats it - if its not in glorious technicolour it hasnt happened :D Quote Link to comment Share on other sites More sharing options...
R0llamite Posted June 8, 2015 Share Posted June 8, 2015 PREPARE YOURSELVES; Lot of pics I hadnt uploaded previously; ALLOY TMIC TO COMPARED TO STANDARD alloys WITH PURPLE GRENADE DUST CAPS ENGINE BAY PRE REMAP DRIVE PIC MID BUILD ON ROLLERS SC AFTER REMAP ENGINE BLOW UP... LOL JOKING JUST AN OLD Shell I WAS SNOOPING THERE Quote Link to comment Share on other sites More sharing options...
R0llamite Posted June 8, 2015 Share Posted June 8, 2015 OFF TO ROTHERHAM SCOOBIES AFTER IT BLEW UP ON SC ROLLERS TREATING IT TO SOME STI SPOILERS THEN UNDERSEALING ASDA CAR PARK REPPIN 1 Quote Link to comment Share on other sites More sharing options...
R0llamite Posted June 8, 2015 Share Posted June 8, 2015 GRILL ON AND GLOW IN THE DARK JAPANESE LICENSE PLATE AND SMALL REG PLATE FITTED OLD AND NEW PURPLE TOW HOOK ANOTHER FRONT END PIC CARS IN THE PARK HEDLEY HALL UK SCOOBIES STAND Quote Link to comment Share on other sites More sharing options...
R0llamite Posted June 8, 2015 Share Posted June 8, 2015 YORKSHIRE MODS MEET BADASS PIC I LIKE THIS ONE MOT TIME PASSED WITH NO ADVISORIES, REPLACED WERE; REAR SHOCK, HORN PLUGGED IN, ABS SENSOR SO ABS NOW WORKS, SWAPPED OUT ORANGE SIDE LIGHTS AND SMALL PLATE FOR STANDARD, DONE THROUGH SHEFFIELD SUBARU SERVICE, TOP BLOKE! WELCOMED A THIRD SUBARU A ROYAL SILVER UK2000 WAGON 2 Quote Link to comment Share on other sites More sharing options...
R0llamite Posted June 8, 2015 Share Posted June 8, 2015 PURPLE WHEEL NUTS YA'LLLLLLLLLLLLLL THEN FINALLY GOT SOME MORETTES Quote Link to comment Share on other sites More sharing options...
R0llamite Posted June 8, 2015 Share Posted June 8, 2015 MY ENGINE BAY AS IT IS NOW, BIT DIRTY BEEN MEANING TO SPRUCE IT UP A BIT :S AND MY DOG LOL 2 Quote Link to comment Share on other sites More sharing options...
R0llamite Posted June 8, 2015 Share Posted June 8, 2015 Oh and my arch was redone, and a pin prick bubble came back up so they re did it and it cam back so they have offered to replace the arch with the front drivers side wing and redo it again for free, JR CLASSIC DONCASTER brilliant bunch of guys EXTREME PERFECTIONISTS!! 1 Quote Link to comment Share on other sites More sharing options...
quit Posted June 8, 2015 Share Posted June 8, 2015 holly crap, a rotherham scooby repaired car still on the road ?? Looks good tho mate, love the wheels Quote Link to comment Share on other sites More sharing options...
Jay762 Posted June 8, 2015 Share Posted June 8, 2015 looking top drawer there chum, those wheels really set it off ;) Quote Link to comment Share on other sites More sharing options...
quit Posted June 8, 2015 Share Posted June 8, 2015 love classic morrettes, changes the look! i love my wagon with them on Quote Link to comment Share on other sites More sharing options...
Gambit Posted June 8, 2015 Share Posted June 8, 2015 Nice pic's mate been busy and a great result. Like the fast the old saloon you still have it too :D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.