Jay762 Posted December 31, 2013 Share Posted December 31, 2013 I like the idea of the top mounted oil cooler - that way the scoop is now functional - not just for looks :) Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted December 31, 2013 Author Share Posted December 31, 2013 Your right there gambit " variety is the spice of modding " :-D If we all liked the same thing we wouldn't be modding at all , just driving around in the factory finished scoobies . don't get me wrong I put pics on here and like it when people comment on my pride n joy and I'd love my scooby to be clean all the time and dent free but ,seeing as the Mrs uses it to go shopping (car park dents) and my kids cover the inside in mud and sweet wrappers , I won't be able to keep it mint ..... well until I get a second car for her and get that 2 door reshell for me ;-) 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted December 31, 2013 Share Posted December 31, 2013 I have the same problems as all of the above main reason I have tinted windows Only plus side is my Missus doesn't drive it ;) but sweetie wrappers muddy feet marks drives me mad. And like you I try to keep on top of it :D Quote Link to comment Share on other sites More sharing options...
quit Posted December 31, 2013 Share Posted December 31, 2013 Are the 2 pot rear calipers a strait forward swap mate ? Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 1, 2014 Author Share Posted January 1, 2014 I'm not sure about yours matt as I don't know what rear beam you've got . my 97 uk has a 3.54 160 rear diff which means I have the same size rear handbrake shoes as the newage wrx . So all I need to buy are the conversion brackets and new pads (about £75) and then remove the rear splash guards so the bigger newage wrx discs (I got with the calipers) fit . I dropped alyn @ as preformance a email to ask about compatability he's a helpful fella ;-) Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 4, 2014 Author Share Posted January 4, 2014 Got some nano drive oil and mahle filter so while doing the oil change I decided it would be rude not to fit some of the new vacuum hoses I got for xmas of the mother in law . Not much of a visual difference at the moment as I wont fit the full kit until I fit the hdi fmic , but I noticed that some of the original vacuum had become brittle when fitting the engine last year . before Spot the difference :-) 1 Quote Link to comment Share on other sites More sharing options...
Jay762 Posted January 4, 2014 Share Posted January 4, 2014 it did take me a bit but once I had seen one the others appeared - nice job :D Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 29, 2014 Share Posted January 29, 2014 Just letting you know I've moved it here. Whoop-Whoop B) Quote Link to comment Share on other sites More sharing options...
st4lk3r Posted February 20, 2014 Share Posted February 20, 2014 This thread feasting my eyes, brilliant work, waiting for more... Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted February 23, 2014 Author Share Posted February 23, 2014 Yeah my projects taken a back seat due to having more work than I can fit in during the week and being a self employed plasterer ,I can't justify turning work away so haven't got the time to play scoob :'( Saying that it's my birthday at the end of march the mrs has said she'll buy me a few bit's decat downpipe cone filter intake temp sensor (to help with fuel trim due to running maffless) 2 pot rear conversion brackets/pads and a remap once all the above and the hdi fmic are fitted :-) So hopefully I'll be taking a long birthday weekend off and getting stuck in with some updates then . Cheers for the comments , clive 2 Quote Link to comment Share on other sites More sharing options...
Jay762 Posted February 23, 2014 Share Posted February 23, 2014 A very nice birthday pressie list indeed :D Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted February 23, 2014 Author Share Posted February 23, 2014 She's a goodn my mrs ;-) already bought me a ps4 hence why I haven't been on here very much lately as I've been enjoying the 64 player mayhem on bf4 Quote Link to comment Share on other sites More sharing options...
Jay762 Posted February 23, 2014 Share Posted February 23, 2014 def sounds like a keeper :) Quote Link to comment Share on other sites More sharing options...
Gambit Posted February 24, 2014 Share Posted February 24, 2014 I have to agree one very nice Birthday pressie list :D Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted March 9, 2014 Author Share Posted March 9, 2014 Didn't manage to fit anything today but I did a mock fit of the fmic inlet pipework to check what hoses I'd need to plumb in the recirc . was going to paint the pipework but the hdi pipework looks to shiny to cover in paint tbo .does look like I'll have to relocate my adjustable fpr as well :-( Also ordered a 3" entry k&n cone filter as I've found a suitable bit off ally pipework to delete the maff I won't cut it to size until I fit the fmic pipework (and finished polishing it lol), but it gives you the general idea ;-) Still got to get the intake air temp sensor and weld a bung into the fmic to inlet pipe and find a second hand 3" decat , latter of which to be like hens teeth at the min . Quote Link to comment Share on other sites More sharing options...
Gambit Posted March 10, 2014 Share Posted March 10, 2014 Nice little weekend job for you :) Quote Link to comment Share on other sites More sharing options...
Jay762 Posted March 10, 2014 Share Posted March 10, 2014 agree with the pipework keeping it shiny will make it really stand out Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted March 13, 2014 Author Share Posted March 13, 2014 Got a couple of bits of the postie today :-) Inlet air temperature sensor and a 3" bore K &N cone filter , just need the 3" decat downpipe and a long weekend off work Intercooler pipes will be staying shiny , well for now anyways ;-) 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted March 14, 2014 Share Posted March 14, 2014 Very niiiice :) Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted March 15, 2014 Author Share Posted March 15, 2014 After offering up the 3" dia K&N it looked to big to fit in the bay :-( I had found some 3" outside dia ally pipe (in the pic above) while working on site. which I had intended to polish and use to delete the maff . So I thought fook it lets whip the standard air box out and see if I can make it work Had to keep the ally pipe short (75mm) which means that you can only just see 10 mm of the shiny pipe between the K &N and the inlet pipe . Took it for a test drive and it seems to spool a bit earlier and the noise is sublime , it's even made the recirculation valve sound louder . I've chucked a fair bit of money on mods at my scooby but ,think for £42 and 30 mins work it's probably one of the best value for money ones so far :-) 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted March 15, 2014 Share Posted March 15, 2014 Shame wasn't much room for a bit more shiny pipe work but fitted nice and neat job well done. Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted March 15, 2014 Author Share Posted March 15, 2014 Cheers chap will admit I'll have plenty of shiny pipework once I've fitted that fmic cos you can see yer face in that hdi stuff lol . saying that I have been toying with the idea of lagging the pipe from fmic to throttle body to try to keep the temps down ;-) and when I've got the d/s wheel arch liner off im gonna take that blue rusty 3 port bracket off and give it a lick of paint :-) cos it does my head in lol 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted March 15, 2014 Share Posted March 15, 2014 Haha OCD at it's finest to be fair I didn't notice it until you pointed it out but I was admiring the rest of the engine :) Quote Link to comment Share on other sites More sharing options...
gary88ross Posted March 15, 2014 Share Posted March 15, 2014 Very nice car what sort of method u use to paint the engine parts lookin to do some painting and cleaning on mine while engines out did u put hi temp on then normal paint on top or laquar Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted March 16, 2014 Author Share Posted March 16, 2014 Thanks gary . rocker covers and red pipes I fine sanded , de greased to prep . I used a acid etch primer , enamel primer, enamel top coat and then lacquer all in halfrouds finest rattle cans . For the block wire brushed and degrease and then used brush on acid etch primer and brush on hi temp engine/ caliper paint off egay the inlet manifold was already powder coated when I bought it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.