aucky

i had some them in my blob,use some the original bulb holders so a would say these will be right.their is a pair,only unpack 1 for pictures

I wont be going on track as hopefully will just have had car fix't so dont wana push mi luck.but even if cars not fix al push him their just to be at the show n have a wonder round lol [emoji6] Sent from my LG-D855 using Tapatalk

What lights r you wanting them for are they morrettes or original bug.i dont want to split them as their attach to other light fitting.i'll take picture for yeah when a get home.cause am a nice person if their what you want i will let you have light for 20quid n postage cost.want to get them out my way.their fully workin nowt wrong with them.took them out when i citted morrettes to my wagon i had. Sent from my LG-D855 using Tapatalk

give latch a good squirt wd40 threw grill as well as it may be seized up with cold weather.

if its still attached then grab cable with some pliers and give it a tug,could have come loose or streached and leaver not pulling it far enough to open bonnet.

have you had a feel behind the leaver in the car,is the cable still attached to it

i have a set of bugeye headlights if your interested with part that your after.

I do like shiney bits.what header is that is it equal lengh Or un equal. Sent from my LG-D855 using Tapatalk

Its not lowered steve n thats barnsley council for yeah,their fook wits.jay i have a build thread just means am changin order of stuff.was goin be brakes n suspension next but now its head gasket [emoji22] Sent from my LG-D855 using Tapatalk

dont no if these are the right 1's for you mate. http://www.importcarparts.co.uk/parts-info?id=10928&cat=96&sub=97&sec=144&var=85&dc=0&gen=&searchKey=&searchPart=

@Xander lol i dont no why it was reading that its usually 23,if only it was that all the time.

picture of all gauges in car but sad as just found out head gasket has gone and on way back from garage i hit a man hole cover on road works and smashed my lip spoiler,hmm decision's.

halfords OAT.

well verdict from the garage is the head gasket is shot,like you said @Scoobyghostit is filling up with exhaust gas and blowing coolant out the over flow,and to top my day of i was coming back went threw some road works were resurfacing road and manhole covers were high up,had to drive over them so went slow but still broke my lip spoiler in half,happy days

@Scoobyghost going to nip to garage in morning and have it done.

well car still on the sick.Can leave the car ticking over all day and temp gauges stay perfect but bit white smoke and water coming from exhausts,rev it and get more white smoke but coolant level stays same,go for a drive dont see any smoke and temp stays normal,come home open bonnet and overflow tank is over flowing,heater gone flat cold,will this be a head gasket problem,when i drained coolant their was no sign of any oil in it and when i drained oil this morning their was no coolant in the oil.i read on a site someone with same problem overflow fillin and overflowing and was told it was turbo problem,any advice guys

Holts radweld [emoji6] Sent from my LG-D855 using Tapatalk

@bobert just have to think,it will all have been worth it once it done

thanks,sorted it now,i did use the housing for the hose was easy and works great,hopefully the old boy will be back to full health now,found the water pipe to the turbo was leaking,new clip on sorted that so sould not loose any fluid now,spent most the day flushing the system out,water was crystal clear when done,so will keep a eye on it over next couple days but fingers crossed will be ok,oil change in morning and he sould get a full clean bill of health again thanks for all help and advice guys

I'm also fiitin my water temp gauge at same time,i have 1 of them addaptor that you cut top rad hose but didnt wana do that.is their somewere on engine to mount sensor.thing someone told me before theirs a spare bung over number 3 cilinder. Sent from my LG-D855 using Tapatalk

could give these a call.i had 1 of their exhaust,nice price and nice sound http://www.toyosports.co.uk/

best thing i have read so far today

these will fit http://cobrasport.com/index.php/cobra-sport-exhaust/subaru/impreza/subaru-impreza-sport/gl-06-07.html i think if you got a wrx or sti section then you would need a addapter making as its bigger bore pipe,but if you contact the guys at cobra sport they will tell you what you need or can fit.

Does anyone recommend a brand coolant flush to use.what do you guys use. Sent from my LG-D855 using Tapatalk

@steveuk260i use halfords OAT ready mix't as well,will flush it again at weekend and give it a good clean threw and see how it is.