Everything posted by stants
-
Legacy BH5 GTB Restoration (sort of)
How come your rmoving the wing ? Sent from my SM-G930F using Tapatalk
-
New member, Legacy 3.0 auto
Bigger bill for a major aervice is going to be circa 800-1000 from a main dealer. Good independant should do it for half that Sent from my SM-G930F using Tapatalk
- check engine at high revs
-
New clutch but leak showing
You need to remove the propshaft pull old seal replace with new one and put prop back in, Sent from my SM-G930F using Tapatalk
-
New clutch but leak showing
If they have tilted the box to remove it it could have just leaked out where the propshaft goes into it, or the seal has gone, (mine did the same after new clutch) A new seal is only 8 quid and a 20 min job, I'd wipe the oil off the exhaust and see of it comes back, Sent from my SM-G930F using Tapatalk
-
What have you done to your Subaru today ?
At quarter to one on sunday morning i wasn't doing anything for anyone. I had the foresight to park at the top of the slope [emoji23] Sent from my SM-G930F using Tapatalk
-
What have you done to your Subaru today ?
Dirty pic for ghost 😂 Sent from my SM-G930F using Tapatalk
-
instrument panel bulbs
Hi mate, sorry i've been working/sleeping not done heater but i see you've already done it. Sent from my SM-G930F using Tapatalk
- First timer. Hawkeye blew up on way home
-
What have you done to your Subaru today ?
Of the field or car ? Gone dark now so i'll try get one tomorrow ,luckily the half ton of mud in the wheel arches have fallen off feel sorry for martin as its service time next week 😂 Sent from my SM-G930F using Tapatalk
-
2nd hand o2 sensor
Sould be able to get it sorted on map so its not throwing a cel Sent from my SM-G930F using Tapatalk
-
What have you done to your Subaru today ?
Firday to sunday was spent driving into the middle of a field and back again so the car is covered in mud, inside and out, needs a full valet over the coming days Sent from my SM-G930F using Tapatalk
-
instrument panel bulbs
Looks good could younput up a link to the blue bulbs ? May change mine over, Did you do the heater controls too ? Sent from my SM-G930F using Tapatalk
-
Remote Access Key
Is it the factory fitted alarm ? Sent from my SM-G930F using Tapatalk
- EGR problem (Engine Check Light)
-
Total closure
Souldn't be to hard, the new installer will probably remove the old unit for free, then relieve you of your cash whilst fitting a fancy new one 😂 Sent from my SM-G930F using Tapatalk
-
Do you have a GOOD tracking Print out? and other questions.
http://www.scoobyparts.com/suspension/whiteline/classic-coupe-saloon-wagon/whiteline-camber-adjustment-bolts http://www.scoobyparts.com/suspension/eibach/eibach-camber-adjustment-bolts Sent from my SM-G930F using Tapatalk
-
SF5/Impreza bits needed + 4POT brakes
More the shape of the wheel, oem 17" rims from foz xt with +48 clear 4's fine Sent from my SM-G930F using Tapatalk
-
Newbie needs buying help!!
The fsti bar if anything is a little bit smaller than the impreza, most of the owners go 22mm whitline or similar Sent from my SM-G930F using Tapatalk
-
Legacy BH5 GTB Standard Bilstein Suspension
[emoji33] Tried pedders ? Know they ain't bilsteins but.... http://www.pedders.co.uk/info-about-which-pedders-is-for-you?make=Subaru&model=Liberty&spec=1998-2003%2520BH%2520Wagon Sent from my SM-G930F using Tapatalk
-
Legacy BH5 GTB Standard Bilstein Suspension
Had a look at ipc Geoff ? There were some bilsteins on there for leggy's no idea what model though Sent from my SM-G930F using Tapatalk
-
Peter Lloyd
Hello & welcome All depends, how much have you paid for it ? Fresh imports are about 5k Sent from my SM-G930F using Tapatalk
-
Tuning/remap in the south west?
@craigy73 Roger Clark motorsport is in hinckley, Shouldn't be that far from you Sent from my SM-G930F using Tapatalk
-
New engine advice
2k + for a rebuild, This could be another option http://www.importcarparts.co.uk/parts-info?id=9596&cat=96&sub=0&sec=0&var=0&dc=&gen=&searchKey=&searchPart= Or contact matty at mb developments, breaker of subarus cheapest option probably around a grand for a whole long engine Short and curlies of It is, either way it's not really cheap, you'll need to get the 2nd hand engine mapped to save it going bang too Sent from my SM-G930F using Tapatalk
-
Where can I buy a polar performance chip from?
What's one of those and what price are you looking at the paying for one ? May as well pay for a proper map & supporting software/licence etc An ecu chip will be generic so quite high chance of it going pop where as at least if you go for live map then you'll know it's all running safely Sent from my SM-G930F using Tapatalk