stants

May not even be the rockers but it's fairly common. Best investagate beofre hand lol

It's a pig of a job so if your handy with the spanners it's under fifty quid for both sets of gaskets and half moons. But expect lots of swearing and pain, if you can't be arsed then it's roughly an hours labour.

Ah well re installed gp suite vcl player and a couple of codec packs, I now have the option to play through ' classic media player' works fine apart form no sound hahaha. Gave up last night but I can't be far off so will have another crack later

Wear and tear they all go at some point

Yep, due to the layout of the engine the oil pools on the side of the cam cover when cool and makes the rubber slowly go brittle with heat.

Possibly cam cover gaskets weeping ? Usually the o/s one as it's close to the downpipe and gets hot and perishes, have a look between the airbox and side of engine, directly down you'll see some oily residue on the up pipe if it is weeping

Hello & welcome ☺

Result !

Fair do's the pagid discs and pads are good, available form quite a few places, or there's mintex or black diamond not used the mintex but using a set of bd pads at the mo really good cheap upgrade

Depends what your after www.importcarparts.co.uk for oem stuff. Www.scoobyparts.com or one of the many other scooby sites for aftermarket or you could just try your local motor factors or euro car parts etc

Yeah that's the next port of call gonna do it with the gp studio aswell

Downloaded a codec pack and I'm able to see the old videos now vlc player is refusing to play anything now but the one I converted last night still won't play so I'll go back and re edit and see what happens and what it saves it as

Cool that's what I though some people have had trouble fitting them to the foz (mainly Americans ) ☺ when I looked before it just said 92-07 so I guessed it would be ok

Ah ok, I'll have a look around and have a word, [emoji106]

Cool well my folks friends own a computer shop and my best mate is an it geek that writes programmes for solicitors so I'll pester him for a bit then take the specs down to the shop see what kind of deal I can get done

Well I'm tempted to run the tv as a screen nit to fussed about quality, have a couple of small samsung smart tv's that should do the job, What the hell is i5 & i7 ? So not clued up with anything these days, my laptop has a fair amount of ram and what not just the graphics card only runs at 1.4 gig which is letting me down, I guess I need a fair bit of ram good graphics card, good processor 4gig ish ? And not much else, maybe a cheeky solid state HD too ?

Only had laptop cos to hard to fap and hold tablet at same time, [emoji52] I don't really use anything other than phone &tablet these days, no idea what's what either as appears to be so much choice, All I want is to be able to watch & edit films save them that's it

I Have no need for one up until now, but looks like moving house is on the cards soon so spare room to man cave conversion ahoy !

Cheers fella, my auto correct is almost as bad as yours ment vlc haha Even tried quick time but is's no better I'll have a look on my lunch when I have some peace &quiet. Should really look at just buying a proper desk top with loads of memory and good graphics card

Managed to work out that win 10 has removed the media centre and replaced it with a crap copy of media player that isn't able to play avi files, as comes up with missing codecs error, old player you used to be able to check boxes or find a patch. Also my vln player has stopped working so it must have removed a lot of stuff to stop it all working, Can anyone point me in the right direction as to where to get the codec packs from or suggestions to a decent media player that will play avi files

Not gonna have the funds till after the 4th so if you still have them then I'll take them off your hands. Obviously if someone else wants them before me the all good, Do they come with the metal bits ? Do you have a pn at all Just trying to work out if they'll fit the foz ok as I've read conflicting reports

My guess is that the bolts have been out before and someone 's roughly marked the location of where they were to be able to put it back in the same position

2+ for rcm

Yes should tell you which one is duff, it's most probably the upstream one as that's the one that's gets the hottest, don't hold me to it though

Tempting, I'll see how finances are and get back to you, in a short while, seem to be hemmoraging money I don't have at the mo, only need the engine mounts as have the pitch stop,