September 11, 201510 yr Author Ok guys got myself motivated and finished refurbin my wheels Here couple pictures with them on. Need to get it lowered now, thinking some tien coilovers maybe.
September 22, 201510 yr Author Got my lip splitter today Its on car but picture was 2 dark to see it so take another tommorrow.its not as big as i had hoped but will be ok. Sent from my GT-N7100 using Tapatalk
September 23, 201510 yr Author Not the greatest pictures,but here's mi splitter [emoji2] Sent from my GT-N7100 using Tapatalk
September 23, 201510 yr Author Starting more work on rear of car.de wipered the back as i never use it and think it looks much cleaner without it. Sent from my GT-N7100 using Tapatalk
September 23, 201510 yr That's what my splitter is like. I want to find one that sticks out more. But looks good. I am thinking about de wipe ring.
September 23, 201510 yr Author Yeah would be better if it could have sat level with bumper instead of being sat about a inch back.but still looks good and finish's the front of nice.in all years i have been driving i never used rear wiper,hate to see the half moon swoosh on rear windows they leave,so for £7 and 20min work i think its 1 best mods av done [emoji2] Sent from my GT-N7100 using Tapatalk
September 23, 201510 yr Yeah would be better if it could have sat level with bumper instead of being sat about a inch back.but still looks good and finish's the front of nice.in all years i have been driving i never used rear wiper,hate to see the half moon swoosh on rear windows they leave,so for £7 and 20min work i think its 1 best mods av done [emoji2] Yer looks really clean I am very tempted after seeing that. Sent from my GT-N7100 using Tapatalk
September 24, 201510 yr Guys they have "sticky out" ones on Japanparts. :) http://www.japanparts.com/ Really coming on buddy keep up the good work
September 28, 201510 yr Author Couple gauges come today [emoji2] Sent from my GT-N7100 using Tapatalk
September 28, 201510 yr Author Boost,oil pres/temp,water temp and volts a like to no what stuff is doing [emoji6] Sent from my GT-N7100 using Tapatalk
September 28, 201510 yr Exactly the same. That should be fun fitting. I have a 4-1 60mm gauge. Boost needle with oled display showing oil temp/pressure and voltage. I feel a gauge is a must on a modified car. That way you can monitor what the car is saying. Early warning device.
September 28, 201510 yr Author I have a couple ideas for were to fit them,just see what i like best.souldnt be 2 hard to fit,only need to wire 1 up then can chain them all together.5 min job lol [emoji15] Sent from my GT-N7100 using Tapatalk
September 28, 201510 yr You gotta fit all the sender's though? I had to get an adapter kit(classic impreza) for the oil sensors. Boost/voltage were easy enough.
September 28, 201510 yr Author Got a sandwich plate for oil sensors.mishimoto adapter for water on order.boost were i had the vac pipe fitter on my bug its diffrent to this engine so have to have another look were to put it on this. Sent from my GT-N7100 using Tapatalk
September 28, 201510 yr Ah you went sandwich. I got the T piece for oil pressure which goes in the oe pressure switch hole and allows for the oe sender and gauge sender to be fitted. For temp I went for the bung over cyl#3. I heard the sandwich plates aren't so accurate?
September 28, 201510 yr Author Reason i got sandwich plate is had 1 on my blobeye and seamed ok and easy job to fit,will have a look at them t pieces. Sent from my GT-N7100 using Tapatalk
October 5, 201510 yr Author Samco silicone radiator hoses come today Sent from my GT-N7100 using Tapatalk
October 23, 201510 yr Author Hi guys,quick question,do you have to have a rear fog light by law and if necessary does it have to be in the cluster or can i move it.I remember older cars having them under bumper like spotlights,can you have 2 and does size of them matter.Cheers :D
October 23, 201510 yr Hi guys,quick question,do you have to have a rear fog light by law and if necessary does it have to be in the cluster or can i move it.I remember older cars having them under bumper like spotlights,can you have 2 and does size of them matter.Cheers :D Rear fog is part of mot but can be any red light on the back of the car I think. I know a friend with an import and its stuck on the bumper. What you planning?
October 23, 201510 yr Author Well am thinking of trying some them smoked ovelays on my rear lights but dont want to have to have a read peace in it i want the hole lights smoked if am having them.so was studying the car and the previouse owner i'm guessing had a towbar fitted as they have cut a square out the bottom of the rear defusser in the middle only thing i could think they have done it for.so i thought i could get a nice light to cover that up then could have the full smoke overlays.but then i also got thinking their is 2 red reflectors in the rear bumper,wondering if i could fit some fogs their and fix the hole in diffuser. Sent from my GT-N7100 using Tapatalk
October 23, 201510 yr I know you need reflectors by law but if they where also lights might work. Lot of jap spec sti hatches have a single centre fog where a tow bar would be so could be cool. -- I make Films for businesses and people. I also make websites.
October 23, 201510 yr Author I know you need reflectors by law but if they where also lights might work. Lot of jap spec sti hatches have a single centre fog where a tow bar would be so could be cool. -- I make Films for businesses and people. I also make websites. I'll have a look at them jap spec when a get pc back from shop later.its only a idea im my heas for car at min along with the meny other ideas.will decide after wednesday when i have had my exhaust fitted,woohoo very excited [emoji6] Sent from my GT-N7100 using Tapatalk
Create an account or sign in to comment