Time i had my own thread

[Rps]

Just needs replacing mate i used the one in the kit pic below 

It allows ic pipe past but you retant the original cap see pic below

Also mate when you have cut all the back of the opening below the reg plate off the bumper if you use 2 screwdrivers in the bumper holes it makes it much easier to get the cut marked up wi must of had it on and off 30 times but the result looks factory if you look in the pic below you will see a red and yellow screwdriver holding the bumper on

The masking tape is still on in the above pic we used that to draw our marks on then when finished sanded the back edge so it was neat and left no ruff edges obv dont sand the painted part just the back cut edge

[mattiekane]

What's the black plastic bit like just under the number plate holder? Could that be cut out too? Just a thought

Sent from my HTC One M9 using Tapatalk

[mattiekane]

Do you have the I/c spray fitted to yours, if so have you looked at moving it to front bumper for the fmic?

Sent from my HTC One M9 using Tapatalk

[Rps]

The black plastic bit could be removed but the intercooler slopes in at the top so i thought it might look abit daft so i left it also i havent moved the i/c soray line it would be really easy but i cant see if bieng benificial as its head on with air now isnt it so abit of water wouldnt make much diffrence.

😊

[Rps]

Right then updated pics of the new dump valve fitted (cheap one for now till i pick the one i want)

[Rps]

Also today i debadged my grill to give a meaner look and also after advice from other members removed the black strip from behind the reg plate to see the fmic more 

[Rps]

Also installed some pink mishimoto rad stays finally

[Rps]

Quick update ive just ordered my coilovers so fingers crossed i can get these fitted friday and 4 wheel geo set up done 😊

[Rps]

Right new dv today and map tweek at scooby clinic took the car from 325 to 340bhp which was good 😀

[Rps]

Also had new header tank fitted and colour matched to perrin induct kit

Before

After

[Rps]

Also got my cold feed kit in post so il look at this over the weekend

[Rps]

[Jay762]

Like the finish on the header tank - nice touch matching it to the intake

[Rps]

Cheers mate also i got fire haha 🔥🔥🔥

[Rps]

Today i fitted a cold feed to my induct kit simple job in paper pain in the !Removed! to get the pipe down the wing with the intercooler piping anyway results are

[Tidgy]

Getting there matey, one comment is get some mesh in front of the intercooler, last thing you want is a stone going through.

[Rps]

@TidgyI like seeing it tho mate so il take that risk lol

What about this then.spot the problem

[stants]

There's only 3 shocks there ?

Sent from my SM-G930F using Tapatalk

[Rps]

Yea thats right lol massively dissapointed but i bought direct so called them as my cars booked in at scooby clinic wed for fitting so there shipping a full set to scooby clinic for first thing wednesday morn so i cant complain the lady was really helpful too

[mattiekane]

Keeping other 3? 😁

Sent from my HTC One M9 using Tapatalk

[Rps]

Ordered this

Come at me bro

[mattiekane]

Waaaaaaaap stututututu pop !Removed! waaaaaaap.......etc etc

Sent from my HTC One M9 using Tapatalk

[Rps]

Edit 

Imagine rusty nails in an empty paint can

Then add nails down a chalk board

Then wen ur watching tv and the adverts come on 1000000 times louder than the programme your watching and it makes you jump.

😲😲😲😲😀😀😀😲

[mattiekane]

R-E-V-E-R-S-E intake!!!!!!!!!!!!

Sent from my HTC One M9 using Tapatalk

[Tidgy]

Haha :)

 

Just don't corner it hard, they roll over