david1972 Posted March 10, 2018 Posted March 10, 2018 Couldn’t resist a quick test fit of my vortex spoiler yesterday eitherSent from my iphone using Tapatalk
macadder Posted March 15, 2018 Posted March 15, 2018 Cars back on the road with a new stage 2 clutch and flywheel (will take some getting used to). Noticed a rust patch on the boot just above the badge so will need to get that looked at soon I think.
david1972 Posted March 16, 2018 Posted March 16, 2018 Got my car back from paint - crossed paths with a gritter on the way home Think my scoop needs tightening down, as back corners lifting at speed. Gearbox issue getting worse - need to get in in to my garage before the auto shifter won't move full stop
Gambit Posted March 16, 2018 Posted March 16, 2018 Ouch not good mate and not loads of time either [emoji54]Sent from my SM-G935F using Tapatalk
savage bulldogs Posted March 17, 2018 Posted March 17, 2018 Seeing as the v1sti seems to be jealous of the bug taking up all the scooby time [emoji849] i bought her a couple of preface scoops for when i (eventually) get round to refreshing the paintwork [emoji4]
savage bulldogs Posted March 18, 2018 Posted March 18, 2018 Trying to curb the urge to paint the bug's block before rebuilding it [emoji849]Just cos i like painted bays , it doesn't mean the next owner will [emoji848]It's still gotta go through the engineer's hot wash but ive spent about a hr on 1 casing halve and its not made a great deal of difference imo [emoji848]
RAY54 Posted March 18, 2018 Posted March 18, 2018 Which halve..........only joking... Iv,e been there many times, its damded hard work. I use alloy wheel cleaner (try an area first & dilute if to agressive) ,let it dry some, go over with small wire brush on drill + small wire" toothbrush" style brush. Wear gloves and a mask, Depending on how well you what the finish, keep going over with APC till you are happy with results. Protect with ACF 50 (smells as it burns off) good luck!! 1
savage bulldogs Posted March 19, 2018 Posted March 19, 2018 Yeah I've polished a few ally bits before , pretty time consuming to get good results [emoji53]My engineer is gonna blast the cam covers and i think i might just get a quote for cleaning up the block too [emoji4]
kershaw-330s Posted March 19, 2018 Posted March 19, 2018 On 10/03/2018 at 4:59 PM, david1972 said: Couldn’t resist a quick test fit of my vortex spoiler yesterday either Sent from my iPhone using Tapatalk Looks good mate always liked them 🤘🏼 1
kershaw-330s Posted March 19, 2018 Posted March 19, 2018 On 15/03/2018 at 10:39 AM, macadder said: Cars back on the road with a new stage 2 clutch and flywheel (will take some getting used to). Noticed a rust patch on the boot just above the badge so will need to get that looked at soon I think. What clutch and fly did you go for? , I’m running a competition clutch stage two with the standard fly , quite heavy but not too bad, also it maybe worth taking your spoiler off if your noticing rust I found a lil bit undermine going into the body shop soon
RAY54 Posted March 19, 2018 Posted March 19, 2018 13 hours ago, savage bulldogs said: Yeah I've polished a few ally bits before , pretty time consuming to get good results My engineer is gonna blast the cam covers and i think i might just get a quote for cleaning up the block too Very sensible..
Jesse James Posted March 19, 2018 Posted March 19, 2018 Got my first Mot and Service in my ownership. Always worry when my mechanic sees a new car of mine for the 1st time. I obviously value his opinion far to much.Got some new godspeed discs as a last minute decision over the Brembo ones. Just hope it all goes wellSent from my SM-G935F using Tapatalk
david1972 Posted March 21, 2018 Posted March 21, 2018 Had the car in today to sort the gearbox issue and have the v-belts changed.Pleased to say it’s all fixed and good as new :)Turned out the cable from the selector was snagged / trapped. Feels better than it ever has now, so probably had a slight issue when I first got it.Happy owner again lol Sent from my iphone using Tapatalk 2
Mattb Posted March 25, 2018 Posted March 25, 2018 I’ve been and bought an undertray and got some wheel arch liners with the vents still attached for £30 nicker! It’s a deal it’s a steal.. 1
Gambit Posted March 25, 2018 Posted March 25, 2018 Nice bargain that [emoji4]Sent from my SM-G935F using Tapatalk
Mattb Posted March 25, 2018 Posted March 25, 2018 £15 dirty derv but still a bargain. The guy had loads of stuff but I had to stop myself. There’s a gear box undertray coming this week too. £30 eBay bargain.
Gambit Posted March 25, 2018 Posted March 25, 2018 Haha always the way [emoji23]Sent from my SM-G935F using Tapatalk
Ric Posted March 26, 2018 Posted March 26, 2018 Just had the first MOT during my ownership on Thursday. Pleased to say it flew through first time, emissions sheet was the lowest ive ever seen, thanks to a recent O2 sensor and a dose of Forte our local mechanic put through. Even more pleased to find that the noise on full right turn (I thought it might be cv joint) turned out to be just the tyre rubbing on the arch liner, which has pulled out a bit.
Jay762 Posted April 1, 2018 Posted April 1, 2018 !Removed! pot holes grrrrrrr x2 wheels with flats on them - knew I had done the one 30mph, narrow road dibble on coming so no chance to swerve but the other one I thought had just thrown a weight, replacing brake pads today and found the damage thread in wanted section shortly....
david1972 Posted April 1, 2018 Posted April 1, 2018 Little uplift done today between the hailstones. Also gave the window glass a good clay and polish Sent from my iphone using Tapatalk 1
Marshffs Posted April 2, 2018 Posted April 2, 2018 Did this over the weekend, changed most of the vacuum hoses for yellow, still need afew more doing but need more hose. Also sprayed my fuse cover and washer bottle and fitted them. Want the hellas doing yellow aswel so come payday ill get few things ordered. 1
Cocker-Leachy Posted April 4, 2018 Posted April 4, 2018 After winter Full polish and wax, in the hope that winter is actually going to end. 🖕 2
kershaw-330s Posted April 9, 2018 Posted April 9, 2018 Not been very active on here lately as tapatalk went weird but I’m back now [emoji51] , need to update my build thread again , but this arrived the other day , who can guess what’s in the boxes Sent from my iphone using Tapatalk
Jesse James Posted April 9, 2018 Posted April 9, 2018 Not been very active on here lately as tapatalk went weird but I’m back now [emoji51] , need to update my build thread again , but this arrived the other day , who can guess what’s in the boxes Sent from my iPhone using Tapatalk Nice to see you back, would be good for this forum to be more active.Is it a gear knob? Sent from my SM-G960F using Tapatalk
kershaw-330s Posted April 9, 2018 Posted April 9, 2018 Nice to see you back, would be good for this forum to be more active.Is it a gear knob? Sent from my SM-G960F using TapatalkHa no not quite a gear knob more under the engine bay ;) Sent from my iphone using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now