Scoobyghost

Do you have much experience with scoobyclinic? They have a reputation for "creating" work. Good figures none the less. Any other plans for mods?

I paid £1350 for mine December 2014. Mileage was high (158k). I've had no major issues or headaches.

Just to let everyone know here the car was scrapped a good while ago.

Depends on size.

Good luck 😂

Quite a few bits ticked off. Well on your way to 300+ 👍😄

If you want 350 expect to spend a good chunk of cash. To achieve that you'll need a bigger turbo, decat exhaust, new intercooler, fuel pump, possibly injectors(unsure for your model), remap. 350hp is also considered the limit of a 5 speed gearbox before it goes pop. Internals may also start to struggle if it's all still standard. With all that power you're gonna need to stop quicker and get round the corners so consider brakes and handling mods alongside. Starting out on a standard car it's easy to get reasonable gains in power per pound but the higher you go the less hp/£. Someone with better knowledge of your model may pop along and offer better advice than I can.

As hooded said. Good panel filter is all that's needed. Avoid any that have oil in them as it messes up the maf over time. A lot of guys use cosworth panel filters.

New cosworth panel filter and new pfr7b plugs. Finished up and fired it up and ran like !Removed!. Muppet here forgot to plug the maf back in. Plugs looked quite well for a year/10K miles use.

Good to see you Gambit. It's nice to have a break every now and again. Glad it's looking better for you.👍😁

Best to check the flanges then. Rear box will be fine but it depends what connections both you and the new zorst have at downpipe to centre. If it was also a fill system including downpipe on the sellers car it may be a different length if you're still using the standard downpipe. Lots of variables but rarely much difference.

Which section of exhaust. Main issue you will find is between the downpipe and centre pipe. Some are doughnut gasket and some are flat gasket joins.

He doesn't have a premises from what i know. He is based mainly at surrey rolling road but does travel about the country. He was in Ireland last year for a mapping session. Try calling srr for better info. They might know where he will be at what time.

He is notoriously hard to get hold of. Contact him in every way and he'll see it soon hopefully.

Welcome to the club! Nice to see another good looking classic.

Yes he is. Have you called and left a voicemail?

Flat four burble. Can't beat it.

http://pages.ebay.com/link/?nav=item.view&id=381564373584&alt=web Use code cuk20 and it's £191. Almost sold out. 500gb with division.

http://www.rakuten.co.uk/shop/simplygames/product/40942/?l-id=gb_payday-deals_rsp_product_16_xbox-one-1tb-console-black-with-the-division-for-xbox-one&scid=af_lnk_linkshare_svunC25memk&u1=05009gniwb5&_$ja=tsid:63839|cgn:svunC25memk|kw:10&siteID=svunC25memk-RWgWqs9RmzlZ9TBbc7OZSA £260 for 1tb console plus the division. Apparently you can use code MARCH2016 and it's even cheaper.

New systems plus game can be had for around £240

You can buy an external 1tb USB 3.0 hard-drive for £40. May be cheaper to buy 500gb+1tb hd. You'll have even more space.

Mine is 5mph out at 70. My dash cam measures speed and states I'm doing 65. Also on standard size wheels. I think it's a manufacturer safety cushion.

Does it sound like a twang too? A clunk is usually a bush giving up.

Did you use any copper grease on the pads? Not the braking surface. That should stop the squealing as dust gets between back of the pad and caliper.

I get the same. Does make you question if the level is slightly low or high. Stants, I've given up with checking the level on the box. If the stick has oil on it that's good enough. 😂