Jay762

Again I found that there was movement of the wheel on the hub not anywhere near as bad as I found on the Silver hatch but non the less its a simple thing that it appears people get wrong - Spigot ring not the correct size The red one is the one that came with the car the grey is the replacement I got for the Silver hatch to correct that issue, only 1mm out but it means the wheel is not solid on the hub. I have ordered alloy items to replace the current plastic items

Ok so after a few miles the oil leak was still there so I pulled the unit. Looks like the core seals have gone so off for a refurb

replacement turbo arrived - couple of comparison shots Standard on the left, SC46 on the right, Garrett in the middle

Selling this turbo due to going rotated Garret setup No cracks, leaks or play in shaft Full details on SC website shop.scoobyclinic.com/index.php?route=product/product&product_id=131 This ran 505bhp with E85 I do know someone who allegedly got 530bhp on his hatch - all with associated mods of course. Looking for £1200 - please note the socket in some of the pictures is not included in the sale 😁

Wotcha and welcome - Do like the Blob wagons, best combination of wagon front and rear design, classic and hawk always looked a bit narrow and straight for the slightly rounded rear IMO 👍

Looking good there!!

Then at least you will know the car is spot on 👍

as long as the outside circumference is the same as your 18's you are fine even though the wheel diameter is small for example: 205 50 16 205 45 17 205 40 18 So if you spare has a 16 inch wheel as long as it has a 50 profile and your 18's have a 40 the rolling radius will be the same so you can use it no problem without !Removed! up your diff - obviously it will struggle to cope with the power and they are stamped to say no more thank 60KM I think?

Just make sure your rolling radius is the same as your main wheels 👍

Very nice indeed

So the wheel itself is not broken just the mounting point in the boot?

What is wrong with the space saver you have as the wheel itself looks like the ones I have but you are holding a cone over it?

Dont think I have seen an 18" space saver, 15's and 16's - but as long as it clears your brake calipers a 16 should be fine (plus right profile tyre wall to maintain a matching rolling radius)

you might be able to get a loom adapter, will any of these fit the connectors you have behind the console? https://www.dynamicsounds.co.uk/subaru-steering-wheel-interface-adaptors.html

It does seem to be a little skewed - too sensationalist for me. Not the independent broadcasting medium I was bought up to believe it was

Not that I know of???

Wow that looks in better shape than my 08 hatch - great platform to start 👍

615 in a fozzie - that is awesome - as Savage said, the fozzie owners on here don't tend to be doing the big hp builds. As suggested a build thread would be great, I would be interested to know more

Shame - there is a member on here who wants a 3.0 for towing his caravan, thought it might have been an opportunity

Looking good - and you know the kit works 👍

Welcome - Sales posts generally do better with photos - could you add some. Does it have a tow bar fitted?

Sounds like you need a thread of your own to keep us updated - as mentioned before its a slippery slope 😁

- just thought, I do have the later model steering rack fitted. Its very good 🙂

ok im sure some of our owners will be along to comment

Looking good - can empathise with the running in, currently bedding in a clutch - 500 miles of restraint 😄