Piggysniffer

On order :) gonna fit it and then look at getting the tune I think I need

Jeez dude, you having problems big time, hope that cures it, find it a bit hard to imagine it will as car should defo be hot when mapping I would have thought, fingers crossed ! Ps , mine randomly pulled -9.75 degrees of timing today in the FLKC and dropped IAM to .5 then just went back up to 1 within about a mile, !Removed! cars lol

Wtf ! All covered on warranty I hope... welcome mate 👍

Thanks mate

Hi guys n gals, could somebody tell me where I can buy a genuine oem pcv valve (the one that screws into the rear of the throttle body) for my 07 hawkeye wrx in good old Blighty thanking you muchly

Bugger ! Least it's being fixed now tho.. usualy a split top pipe is sign HG has gone unless the cars real old and the pipes are perished, the HG problem could have split the pipe or your rad cap could have caused it all if you were loosing coolant without knowing, shouldn't be long off the road tho 😕

Are you logging it with romraider to see what cylinder/s misfire

Is it an actual misfire or is the boost jumping around

Any news boon ?

No mate, been stupid busy tbh this weekend, I think I will probs leave it with him as not being able to get hold of people when you want/need them really isn't my bag, I'm the sort of person that texts someone and can't understand why they haven't text back within 3 minutes lol

Thank ze lord :) !! @akafonzie, I've not got a manual in paper form and to be honest I didn't even think to look in there for bleeding the system :-/ I had major issues with my car after an engine out and head off job, and basically crapped myself when I test drive the car and the needle spiked into the red, thought I had put it back together with head gasket in wrong or something, went through a mental picture of doing it and realised I hadn't so googled my problems and found the burping scenario, apparently highly regarded for those cars that just won't bleed, which mine may not have been as I didn't realise there was another way lol, anyway it turned out good for me so thought I would pass it on , peace and love ❤️

Just reread my post, when you Rev it up to 2500 do it like 5 or 6 times each time you do it then back to squeezing, best of luck mate

I had loads of trouble with mine, firstly I would wonder why it split, if your happy that it wasn't an underlying problem like head gasket failure then you need to burp it, basically what I had to do after much research, is this jack the car up at the front as high as you can possibly get it, fill up with coolant in the rad then put cap back on, then fill through the tank that's near your abs pump (that extra little tank with a rad cap on), then you need to get a bottle (bottom cut off)or a funnel and make it fit Into that tank nice and snug with no leaks so that basically you can fill up the funnel/bottle so that the water level is a good 6-8 inches higher than the actual tank with a few inches spare at the top of bottle/funnel for expansion and for when you squeeze the hoses, then you need to mostly fill up that bottle and run your car maybe for a good 20 minutes maybe 30 or 40 depending on how long it takes for your themostat to open, so probably 20 mins after its opened and the car should be fully burped (keep an eye on temp gauge), squeezing hoses like a madman (watch out for spinning engine components, belts and pulleys etc), in between the hose squeezing you need every 3 or 4 mins, to rev your car up and down to 2500 rpm and maybe hold it at 2500 for a few second here and there, then straight back to squeezing hoses, keep an eye on the funnel/bottle, so that the level doesn't go down to far, you can also see the bubbles coming up in there (if it's clear plastic) , if your car doesn't have another problem then this should burp it, you must get it as high as you can on the jack tho hope this helps (hope your car has the tank by the abs pump lol )

Also, what about subaru4u in Newbury for tuning

Or....... Racedynamix (Duncan Graham) is based at Triton on Hurn AirportTriton Motor Services Ltd307A Enterprise WayAviation Park WestBournemouth International AirportChristchurchDorsetBH23 6NW lol, no wonder he's hard to track down

I had an address that was aviation road (I think) Christchurch, but I just can't find it anymore , odd edit obile-friendly - 14 Feb 2013 - Race Dynamix Building 461, Aviation Park West, Christchurch Dorset United Kingdom BH23 6NW

Lol, ok thanks SG, I was basically trying to get up to his place tomorrow morning so he could have a quick look at my car/map and tell me what he could do and how much, just assumed it was a smallish company with secretary etc, will persevere

No mate, just an email through his contact page on website, will give him a call in the morn

Still no word from racedynamix, is he a one man band ?

Thread jack......... 😜

Okay guys, thanks again for all your input, I have emailed racedynamix on the 30th March, have had no reply so far, will hopefully have a chat with them about my car and make some sort of decision from there, it is driving a touch better, I have globally removed 2 degrees of timing and have so far had no more FLKC and cleaner pulls power wise

Listened on my phone and couldn't really hear bug ger all, so I'm no help at all as usual :-/

Used to get that on my old sapph cozzie after a spirited drive, I think it was the return water pipe from turbo that was causing the noise as the turbo boiled the water, don't suppose that helps but thought I would put it out there :)

Any news ?

Can't see a video mate