stants

I'll be going [emoji1]

How did you get on ?

Hi mate, the imports have shorter gearing so won't work with uk diffs/driveshafts, so you'd need to find one that has the same ratios, not sure if there are uk boxes with the same as imports, best off asking savage on that one. Theres a guy in Hebden Bridge that does rebuilds & swaps ill see of I can find his number, if I remeber it was about £ 350. You been running round without a rear wing a couple of weeks ago ?

I got nick & ash's run filmed and thats about it need it invest in a proper camera :-D Don't know if either of them are posting up themselves

:-D Found the info on Ayrshire scoobies fb page, so don't know fif they are organising it this year instead of Cumbria scoobies. I'll do a bit more digging

To busy worrying about the abuse he gave his clutch on sunday :-D

Date for next years NBO is 21st June at lightwater valley, If it's anything like this year it will be pay on the gate

Spoke to ash on sunday he told me it was off ! !Removed! !

Hi mate welcome, There are a couple of options, any forester mid section up to 2004 should fit not sure about the back box. Classic impreza ones fit but require some welding to re position the hangers on the back box as the box is a slightly different shape and size, Heywood & scott do forester cat back systems but they are pricey, and finally powerflow can make you one at one of their franchises nationwide. Not sure about costing though. Or you could go the whole hog and get one custom made with new cats

http://uk.subaruownersclub.com/forums/topic/5234-hks-ssqv-dump-valve-real-or-fake/#entry29542 Some pics to help

Speak to simon at jolly green monster. I'm guessing it will be an ecutek licence & map so 350-500 quid. Should see a good increase in torque power and more miles to the gallon.

Ooof thats a bit steep, if you still need the manual send me a pm and I'll email it in pdf format.

Ok I think it's a sigma, however I dont have this alarm so if someone else confirms this would be good, theres a link to the alarm manual I'll dig out for you.

Sorry mate, I was on the road at 6 by the time I finished filming nick & ash do their strip runs my phone was on it's last legs. Should really invest in a propper camera. Out of all the scoobies there I think I was the only foz, not many legacies there either :-(

Been to japshow [emoji3]

Is it factory fitted? You have the little keypad located somewhere in the dash area.

Sorry my fault I was assuming it was a fmic :O

I'd try a subaru breakers, there's a few being broken on ebay at the moment

Welcome, we are all friendly on here so feel free to get involved, a workhorse it may be but pictures are always appreciated, [emoji3]

Do you have the sigma alarm ? If so do you have the manual, you should be able to dissarm the alarm from the keypad

I'm going prepared for every eventually, don't trust the weather reports these days [emoji16]

I'm in the same boat nick, !Removed! it down every day about 5 o'clock so given up, it will be dark when we all meet up anyway haha, not sure what the forecast has in store for us tomorrow

Normally a pain to fit, have you all the pipework ready, I'd do a mock up. Then measure and re measure as theres usually some cutting of the inner wing or front beam, And expect some increased lag from the extra length involved. Take a load of pics along the way do a write up on here if you have the time :-D

Hi mate welcome :-D nice looking foz, 90% of classic impreza bits will fit on our car. Only really the suspension that is different due to the increased weight over the rear end. What cross member are you after ?

Oil turned up, filter hasn't [emoji20] will have to wait till monday to do change