stants

@Paul_JJ I bought one for a classic, had few fitment issues but got there in the end Sent from my SM-G930F using Tapatalk

Have you plugged in the diagnostic clips under the cash to see if it's blinked out a fault code ? What fuel do you stick in it ? More than Likely to be an o2 sensor or maf issue Sent from my SM-G930F using Tapatalk

Looking great there mate 🖒 least you won't have to worry about the crappy oem rad giving way Sent from my SM-G930F using Tapatalk

Probably could do it, but the sti has different injectors, turbo and cam profile, what's your plans ? Sent from my SM-G930F using Tapatalk

Andy Carr does mapping at teg sport, Manchester way i think, there Andy Forrest up in Scotland if you fancy a drive, Duncan graham travels and there's Scooby clinic in chesterfield again if you fancy a drive And if anyone's quoting you a 'stage 1' map I'd steer clear as all of the above will offer a bespoke map suited to the car and what you are after from it, All I'll say before this thread develops into a 'my mapper's better than yours' flame war etc is do your research read up about the various mappers, try and discuss what you want and take it from there as there's pros and cons to any mapper. Sent from my SM-G930F using Tapatalk

There was a chap on here a while back from the iom, but it looks like the car you have so maybe you boughtbit from him ? Sent from my SM-G930F using Tapatalk

Have they upped the service intervals now ? I know the early ones were 6monthly [emoji33] Sent from my SM-G930F using Tapatalk

Don't even worry about it go buy a new socket, My engines claimed a pair of pliers, 19mm crows foot 12& 10 1mm sockets, they come out eventually Sent from my SM-G930F using Tapatalk

Have a look at www.viperperformance.co.uk They do the intakes, cheaper than perrin chances are they will have one in stock and the quality is good too Sent from my SM-G930F using Tapatalk

Impartsb46 on eBay has wings for sale if your interested Sent from my SM-G930F using Tapatalk

Don't worry about bolt unless it's knackered or you've stripped the threads it will be fine, As for the crush washer did you not have one taped to the box ? Normally get shipped out with the filter, Sent from my SM-G930F using Tapatalk

Www.importcarparts.co.uk Kyb struts will only be around 70 quid a corner. The struts will fit from other models but the spring rates may be different Sent from my SM-G930F using Tapatalk

Audio or video ? Most people just upload to YouTube them post up Sent from my SM-G930F using Tapatalk

I'm.not buying a permit out of principle 😂 Sent from my SM-G930F using Tapatalk

Ah ok, I knew they changed the location of the pcv at some point but yours sounds like it's in the same position screwed into the tb ? I had mine done all wrong as was catching nowt, 😂 it's now been correctly plumbed in and works like a treat, bit of a pain as not a great deal of room but if you want to run it with the pcv in place and retain a closed loop you'll need to come off the block breather underneath the i/c then into can then from can back to pcv Sent from my SM-G930F using Tapatalk

You putting yourself forward ? Used to have a lad Sheffield do it but he's probably sold up, and I was doing it up here for a bit but fell flat on it's !Removed! after about 3 weeks as no one came back to the next meet 😂 Sent from my SM-G930F using Tapatalk

Have a look at http://www.godspeedbrakes.co.uk/ They will be able to sort you out with pretty much anything 🖒 and give good impartial advice Sent from my SM-G930F using Tapatalk

Horses for courses really the pcv is about 11 quid from import car parts, fairly easy to do, think yours may be in a different position than the older cars though ? You can do all three into one can but it's not advised, saying that I know people who do do it with no problems, propper way would be to use two cans depends on how much you fancy a challenge Sent from my SM-G930F using Tapatalk

Some people may have taken offence on the spelling tis all 😂 Sent from my SM-G930F using Tapatalk

Yes mate up for the touring cars, I'm traveling up with at least two in mine if plans change I'll drop you a line and stop by on the way back put a face to a name Sent from my SM-G930F using Tapatalk

Where are you plumbing it it to mate ? If off the pcv then it's a bit of a pain, off the heads it's fairly straightforward as both sides the same diameter Sent from my SM-G930F using Tapatalk

Maybe david i'm up at croft the week before, usually falls on something she's booked in though, happened the last 3 years 😂 Sent from my SM-G930F using Tapatalk

@Rps edited your post incase of any comeback 😂 Sent from my SM-G930F using Tapatalk

Indeed a resonated section makes the world of difference, perfect daily imo even see over 30mpg sometimes 😂 Sent from my SM-G930F using Tapatalk

[emoji33] Sent from my SM-G930F using Tapatalk