Jump to content

What have you done to your Subaru today ?


stants
 Share

Recommended Posts

2 hours ago, Jay762 said:

will have to check that on mine - know it has not got back to the loom itself as I have done some weeding on that but the sensors i will 

According to some Mercedes forums the have a similar issue.

They had various fixes, like, adding pigtails to the sensor (which mine has) cutting the wires and putting butt connectors in so if the capillary attraction occurs it will drip off them before contaminating the loom.

I had oil inside the sensor and the pigtails, but no further. I de-pined the pigtail and cleaned it out, with contact cleaner.

It seems the oil goes down into the sensor and travels up the sensor. 

  • Like 1
Link to comment
Share on other sites


I have removed and inspected the brake master cylinder and, sprayed the servo. I'm just waiting for a few gaskets delivering, and I can refit everything, and hopefully start on some engine mods.

I'm looking at de-cats to begin with.

I'm very curious to run some water methanol mix. 

 

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Engine bay is back to normal with no leaks on the banjo bolts, fuel pipes, injector seals, or any check engine lights.

I'm going to try and find some apps for data logging with the taxtrix and hopefully pull the stock map off the ECU.

 

 

20200521_191535.jpg

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Discovered the geniuses that assembled the coilovers had set the car up for driving clockwise in a circle - instead of the springs being paired left to right they were paired front to back with 90NM on front and rear left and 70NM on right front and rear 🤡🤡🤡

  • Confused 2
Link to comment
Share on other sites

Ye ha 🤠 cowboy nascar geo settings ?

1 hour ago, Jay762 said:

Discovered the geniuses that assembled the coilovers had set the car up for driving clockwise in a circle - instead of the springs being paired left to right they were paired front to back with 90NM on front and rear left and 70NM on right front and rear 🤡🤡🤡

 

  • Haha 1
Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...
  • 4 weeks later...
  • 1 month later...
  • 2 months later...

Went to get some petrol and have some awd therapy. :thumbsup:

Threw a code whilst being particularly spirited 😁

Currently researching P2006 - Intake manifold air control actuator, bank1....

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support