Jay762

Drove it to and from the cinema!!

Got before and after shots of the spacers in this thread - only went for 20mm but they line up just nicely IMO

not saying its a bad idea necessarily - just what will fit and what wont - I get the need to fill out the arches a bit hence why I went with the spacers myself Doesn't sound like STI rims will fit from the same year - consider spacers to fill out the arches from a width perspective and retain your existing rims £180 for all four corners (I recently learned spacers are sold in pairs) or go for new alloys with a bigger offset, in this case you could opt for a larger diameter also for a firmer ride and again aesthetics - either way feel free to keep us posted

not got that myself???

Wotcha and welcome - check the PCD to confirm but ill wager the STI rims will not fit due to having a different hub. My 08 sport has a PCD fitment of 100 x 5 I believe the STI has a PCD of 114 x 5 and as such the wheels are not inter changeable without an adapter plate With a smaller tyre wall you will get a slightly stiffer ride, potentially less lateral movement of the tyre during hard cornering should improve the feel etc. to fill out the arches on mine I have just invested in 20mm spacers - that is a possible alternative if you like the wheels and ride you currently have

Reads well http://www.williamscarproducts.com.my/index.php?route=synthetic_coat I have used the silicon product they have compared the ceramic coat to and would agree whilst it gave a great shine finish the previous sealant and wax finish was a better solution - would be interested in feedback myself

You shouldn't have a problem - rusty bolts on both the STI I had and the current RX tended to be around the edge of the engine bay nowhere near the scoop airflow - apart from the bolts holding the scoop in place on the bonnet they rusted - I believe - due to the sound proofing blanket holding damp overnight

Result - half the original price you found

According to Jap perf mag this month exedy were oem suppliers for subaru imps an fozzies 98 -01 so sounds like ded worth considering

Good luck with the sale - hopefully it will find a great new home

The hatches i have had were / are quick to clear. Ill see if i can do some investigation with my fluke give you resistance and voltage for comparison

Wotcha and welcome - as above sounds like a leak in your system particularly with the steam and smell symptoms

wont be country on that date so unfortunately cannot take one of those additional tickets off your hands

Thanks - no issues fitting - straight forward, as I will be doing the other pair later this week ill take couple of extra shots The Integra is the lad next door - the aim is when I get some boost back in my life ill take him out try and give him a different perspective but its a tidy vehicle, he spends a lot of time maintaining etc Hadnt looked at the reflection - thinking now I should go and rinse all the snow foam away

Washed car and fitted 20mm spacers - photos here

20mm H&R spacers fitted - just sets it off nicely I think - checked fitment front and rear then had the single pair I purchased on the, ill get a pair delivered for the front this week. Rear before and after Front before and after

I am not familiar with the head unit - do you have a pic you can post up as if it is a combined Sat Nav AV unit you will lose it. But you can by after market units with SatNav included

Today I learnt wheel spacers are sold in pairs DoH!!

Ill have a swing by

Also signed up for the ESL mappers course ☺

Ordered some H&R spacers 20mm 😎

Depends on budget but as a compromise i would suggest a long life stainless option built for your motor that way you can specify volume

Not a car but with an bike i once owned - i rode the nuts off it but kept it in mint condition sold it to buy house 18 months later it was s mess

really coming along now Clive - I can see the battery ending up in the boot though

as above custom map - irrespective of peak power - will imporve the driveability of the car