Jump to content

What have you done to your Subaru today ?


stants
 Share

Recommended Posts

2 minutes ago, tomobwfc said:

 

I was going to try it myself, looks easy on youtube, famous last words aha

Them costs i probs will aha looks good though

Sent from my iPhone using Tapatalk

Don't be ruining your bath to dip parts in haha :P I considered getting a dipping kit but with all the bits and bobs I'm already doing at home I don't have the work space for dipping as well so bit the bullet!

  • Like 1
Link to comment
Share on other sites


Had a little tweek and test with the suspension this afternoon and I think I'm ready to get it geo'd up now .

c54fb6eb6b4f555075437c35686c050a.jpg

If it's not broke .....upgrade it 😊

Do you have adjustable top mounts on rear sav? My coilovers didn't come with them so debating to source some of just use camber bolts for rear. What do you think?

Link to comment
Share on other sites

Mine have Fixed top mounts on the rears but I've already got elbaich camber bolts on the rear.

You could swap the front top oe camber bolt for the rear top oe straight bolt . If your hks ones have pillow ball fronts [emoji6]

Either way i'd suggest to use a top camber bolt on the rears cos otherwise the rear camber is unadjustable and the oe camber might alter if you lower the back end

If it's not broke .....upgrade it 😊

  • Like 1
Link to comment
Share on other sites

The ride height looks just right! Give us some feedback on the ride of them when you've taken it for a good spin. :) I'm itching to buy a set of those meister coil overs with the cam bolts, extenders and the protective coat stuff as they look great and go with my red theme :P

Link to comment
Share on other sites

Took it for a good test run last night 73097b566a592f5c6f529f43525eff70.jpg and no rubbing [emoji5]

I've set the damper back to 16 / 32 as when it was set at 20/32 on Sunday they made the Mrs mods jiggle to much .which is dangerous as I couldn't keep my eyes on the road [emoji23]

Seeing as I've got the damper set bang in the middle of hard and soft and +4 makes a noticeable difference, I can't see that anyone couldn't find a stiffer or softer setting that wouldn't suit their needs [emoji41]

If I was to be Uber critical the only thing that I don't like compared to the elbaich springs and group n top mounts is the road noise has increased due to the solid top mounts on the meister ' s.

Longevity is really the only unanswered question but obviously I won't know what that's like until I've had them on a while [emoji6]

If it's not broke .....upgrade it 😊

  • Like 3
Link to comment
Share on other sites

Took it for a good test run last night 73097b566a592f5c6f529f43525eff70.jpg and no rubbing [emoji5]

I've set the damper back to 16 / 32 as when it was set at 20/32 on Sunday they made the Mrs mods jiggle to much .which is dangerous as I couldn't keep my eyes on the road [emoji23]

Seeing as I've got the damper set bang in the middle of hard and soft and +4 makes a noticeable difference, I can't see that anyone couldn't find a stiffer or softer setting that wouldn't suit their needs [emoji41]

If I was to be Uber critical the only thing that I don't like compared to the elbaich springs and group n top mounts is the road noise has increased due to the solid top mounts on the meister ' s.

Longevity is really the only unanswered question but obviously I won't know what that's like until I've had them on a while [emoji6]

If it's not broke .....upgrade it 😊

😂😂😂 banter

Sent from my HTC One_M8 using Tapatalk

Link to comment
Share on other sites

Dropped my front door key down the side of the driver's seat, next to centre console, and spent an hour trying to get it out! Just got home and took door key out of centre console, and dropped it. I could see it, but could not touch it from above, below or from the back. Moving the seat made no difference. Could not get indoors to get anything to poke it out with. Eventually, a neighbour came home, and I asked her for help - wire or something. She brought out a thin knitting needle, which I used to wiggle the key forward, till it flipped over the seat runner, onto the floor. 

To ensure this does not happen again, I am going to get a 56lb weight, and attach the key to it - no chance of it falling down the gap then!

  • Like 4
Link to comment
Share on other sites

Started refurbing my callipers as it was a nice clear day, that's the nearside finished hoping for another clear dry day tomorrow to do the offside! :) Got all the gauges now as well just waiting for the pods to arrive. 

10156136_10153806632087631_8280533896111025474_n.jpg

12729063_10153806631992631_5062875857740780071_n.jpg

12742006_10153806632197631_3989019333834891708_n.jpg

12743741_10153806632127631_426418306435585660_n.jpg

10401145_10153806631867631_5150856676134556289_n.jpg

12733446_10153806631807631_5027425968566003925_n.jpg

12745774_10153806631927631_394984147146835005_n.jpg

  • Like 3
Link to comment
Share on other sites

18 minutes ago, GeoffLeggy said:

@Hudson

Very nice job on the calipers! :biggrin:

That is a shed load of gauges lol! Id like an oil pressure gauge at least.

I bought an uprated Bosch Battery as my old Battery was starting to struggle to hold charge in the cold and in preparation for the extra drain I will be putting on the Battery powering all the gauges :smile: Only reason for so many is I'd like a bit more peace of mind of the cars health for when I start on the performance upgrades plus I hope they will look nice lit up too without looking too much like a boeing 747 cabin :laugh:

  • Like 1
Link to comment
Share on other sites

This guy is more forgiving than I am, I'd have strung em both up by their privates if it had been my car. Good advertising for Subaru though.

http://www.dailymail.co.uk/news/article-3343221/Forgiving-car-dealership-owner-owed-25-000-teen-vandal-gives-JOB-instead-pressing-charges.html

Sent from my iphone using Tapatalk

Link to comment
Share on other sites

Finished the offside callipers today and had a little bit of calliper paint left which I felt would be rude to waste so spent a bit of time making a stencil and went to work on the intercooler too :)

 12744034_10153808594597631_1554360483996

12734205_10153808594342631_6160072930596153126_n.jpg

 

 

10420348_10153808594512631_5241752963329284466_n.jpg

  • Like 2
Link to comment
Share on other sites

Well was Friday but got 4 new Michelin pilot sport 3 tiers not sure if there any good lol and car had mot flew through no problem not bad for 05 car also had timing belt done and service 2 weeks ago so just about sorted for a little bit

Sent from my SM-G928F using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support