Jay762 Posted June 3, 2019 Share Posted June 3, 2019 Just received a safety recall for the RX - fuel pump harness connector Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 3, 2019 Share Posted June 3, 2019 Well seeing as I booked in a dyno session for the v1sti and wont be using it until the turbos rebuilt and re fitted, I decided to take the v7sti for a dyno health check at last . Glad I did, as first run showed low boost , afr out and low standard 'ish power at 280hp 226flbs 🤔 I use Clive Attowe as he knows his engine's and diagnostics, not just a good mapper . Although both power and boost were down ,he started by cleaning the maf to try and stable the afr's first (better) Then set about finding out why it wasn't making mapped boost targets and found that a pin hadn't been crimped in properly on the boost solenoid plug (got more boost back) I need a new maf and will probably fit a new fuel filter , then go back to see if numbers improve but the end result was 311hp /278flbs . At least I now know it's running safe and the extra 31hp and 52flbs , has made a world of difference to how it drives 😎 6 Quote Link to comment Share on other sites More sharing options...
WideSam Posted June 3, 2019 Share Posted June 3, 2019 Finally got to drive it again! Went for a decent drive with a variety of roads, 30 miles later all is well. No leaks, no steam, no misfires! I just need to sort this p0420 code and put the exhaust back on the hanger I missed end of the month and all should be well ready for the MOT at the end of the month. 3 Quote Link to comment Share on other sites More sharing options...
Dan B89 Posted June 14, 2019 Share Posted June 14, 2019 Checked all fluids, fuelled up, clean up 🤪 3 Quote Link to comment Share on other sites More sharing options...
DaveRAC Posted June 14, 2019 Share Posted June 14, 2019 wish the weather would hold off for me to do that lol Quote Link to comment Share on other sites More sharing options...
Dan B89 Posted June 14, 2019 Share Posted June 14, 2019 Ha ha, literally as soon as I posted that it started raining 😂 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 14, 2019 Share Posted June 14, 2019 Met up with a good mate of mine and went to a local retro car meet . Was nice to finally drive the v1sti again 😎 His evo6 rs is a lovely example , who says evo and scooby owners can't get on 😊 If its rapid ,retro and petrol, generally I like it 😉 3 Quote Link to comment Share on other sites More sharing options...
Garry46 Posted June 15, 2019 Share Posted June 15, 2019 10 hours ago, savage bulldogs said: Met up with a good mate of mine and went to a local retro car meet . Was nice to finally drive the v1sti again 😎 His evo6 rs is a lovely example , who says evo and scooby owners can't get on 😊 If its rapid ,retro and petrol, generally I like it 😉 Stunning looking cars there Clive. And your bang about Evo and Subarus owners getting on as its about the passion for the cars not what badge they have on the front ;-) 2 Quote Link to comment Share on other sites More sharing options...
JamesJDMwagon Posted June 18, 2019 Share Posted June 18, 2019 installed some LED headlight love the yellow I found a set that are yellow on dipped and white on full. And here's a pic of it at brands hatch. 1 Quote Link to comment Share on other sites More sharing options...
Dan B89 Posted June 18, 2019 Share Posted June 18, 2019 Very nice indeed Quote Link to comment Share on other sites More sharing options...
david1972 Posted June 19, 2019 Share Posted June 19, 2019 Have committed last night to importing a leggy wagon....2001 GTB E-tune II auto, only 99k kms in black, grade 4B. Needed a wagon for the dogs so thought I'd add to the stable.Importing without a broker this time, so even better value :)Sent from my SM-G960F using Tapatalk Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 19, 2019 Share Posted June 19, 2019 Gave up getting the gt28r with the popped seals rebuilt, quote started off at £350 😎 .... after inspection the cost went up to nearly £1,000 wtf 🤪😏. So today I bought a brand new billet wheeled tdo5 20g instead 😊 3 Quote Link to comment Share on other sites More sharing options...
Dan B89 Posted June 19, 2019 Share Posted June 19, 2019 😁Very nice indeed Quote Link to comment Share on other sites More sharing options...
Garry46 Posted June 19, 2019 Share Posted June 19, 2019 44 minutes ago, savage bulldogs said: Gave up getting the gt28r with the popped seals rebuilt, quote started off at £350 😎 .... after inspection the cost went up to nearly £1,000 wtf 🤪😏. So today I bought a brand new billet wheeled tdo5 20g instead 😊 Cant wait to see beasty back to its best or better lol 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 19, 2019 Share Posted June 19, 2019 Cheers , it's no expensive owen development turbo but at almost half the cost of the gt28r rebuild and with good reviews from the states , I thought I'd give it a go . Dam right Garry , can't wait to get it fitted and actually start giving the v1sti a dam good spanking for misbehaving ..... and after all that is what she was built for 😊 1 Quote Link to comment Share on other sites More sharing options...
Garry46 Posted June 19, 2019 Share Posted June 19, 2019 4 hours ago, savage bulldogs said: Cheers , it's no expensive owen development turbo but at almost half the cost of the gt28r rebuild and with good reviews from the states , I thought I'd give it a go . Dam right Garry , can't wait to get it fitted and actually start giving the v1sti a dam good spanking for misbehaving ..... and after all that is what she was built for 😊 Spanking now thats a word i like lol Be good to see beasty as intended and fingers crossed that tub will bring you a few more ponies and a big smile on your face :-) 1 Quote Link to comment Share on other sites More sharing options...
Pork chop Posted June 21, 2019 Share Posted June 21, 2019 Removed rear hubs with great difficulty I might add ! eBay spesh 15ton hydraulic pullers, copious amounts of plus gas and heat finally 21 year old splines released phew😬😜 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 21, 2019 Share Posted June 21, 2019 I'm dreading when I have to change any hubs ,bearings or shafts on my 94 sti , they've been in there 25yrs and the shafts have probably been twisted in there nicely by the 6 speed 🙄 How much was the hydraulic puller, Chop ? Quote Link to comment Share on other sites More sharing options...
Pork chop Posted June 23, 2019 Share Posted June 23, 2019 Hi savage, pullers were a bargain mate just over £40 brilliant I had to make a plate to go over the wheel studs tho . https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F264017406153 1 Quote Link to comment Share on other sites More sharing options...
The Notorious S.T.E Posted June 26, 2019 Share Posted June 26, 2019 Gave the BRZ a bit TLC and a wash with this fresh paintwork cleanser I got at the weekend https://www.racshop.co.uk/glossworkz-gloss-booster-and-paintwork-cleanser-16-oz.html Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 28, 2019 Share Posted June 28, 2019 Cheers chap, hopefully I wont need one but if I do that's a pretty cheap solution 👍 As for what am I doing to my subaru today 😉 3 Quote Link to comment Share on other sites More sharing options...
david1972 Posted June 29, 2019 Share Posted June 29, 2019 Treated myself to these 2 for my incoming BH5 2 Quote Link to comment Share on other sites More sharing options...
david1972 Posted July 3, 2019 Share Posted July 3, 2019 Hawk serviced today, along with a nice clean MOT Quote Link to comment Share on other sites More sharing options...
Newman2213 Posted July 3, 2019 Share Posted July 3, 2019 Dropped of the Wagon for an alloy wheel refresh, I will get some pics tomorrow after picking it up. I'm also on the hunt for some decent brake pads for the 4 pot front and 2 pot cast iron calipers. Any suggestions would be appreciated. They are weak! Quote Link to comment Share on other sites More sharing options...
Newman2213 Posted July 4, 2019 Share Posted July 4, 2019 I've collected my wheels today they are in paint code GK1 They are a subtle gold, more of a caramac colour, which I prefer. Top is new Bottom is old The pictures do nothing for them, they have been done to a brilliant standard, and every detail has been discussed and checked before completion. Thanks to BCS Automotive Nottingham 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.